Hi edyasia !My hardware with the Z19? Thanks for help http://www.4shared.com/photo/t_zWfdo...51-47_463.html
Hi edyasia !My hardware with the Z19? Thanks for help http://www.4shared.com/photo/t_zWfdo...51-47_463.html
Hi Edyasia,
I suggest you try newer version CPS as your help says "codeplug version 6817-7084"
My CPS tell me softwareversion/codeplugversion = R130008138 / 7418.
Found this in my CPS PMVN4240A / r01.02.08.00 21-05-2012. And this is in use with release package
MR5.14_NonE2E_Clear_FW8138_FW8139_R01013400.rpk
Vr10: your radio is working????
Groott. i heard someting about .rpk fikes... i have cps plus, can you post your rpk file? maybe work for me.
Tetra Radio not work!
Last edited by vr10; 2012-10-05 at 07:41 PM
............................................ please delete
Last edited by -bup-; 2012-10-06 at 05:47 PM Reason: delete
Hi Edyasia,
I've uploaded my RPK file for MR5.14
It was very difficult because I'm on the road for my job.
Try to download it here: http://www.4shared.com/file/znnDPK0O/MR514_NonE2E_Clear_FW8138_FW81.html?
This file you must import in CPS+ under the tab "Release Package" and then "Import Release Package"
However I hope your CPS+ is new enough to accept this Release Package
Hi Groott Thank you rpk file! cps + / R01.00.09.94 / PMVN4233A / does not match
Last edited by vr10; 2012-10-07 at 03:11 PM
Hi VR10,
Try this one http://www.4shared.com/zip/mm7EiERa/...00_PMVN4.html? You should unzip this zipfile to your PC in the destination folder and then start CPS+ from the BIN folder. (it's a big file 456 Mb so it will take a little time.)
Then import Release package, that should work, but I don't know if it will work when radio gives error but give it a try.
Hi Groott Thank you very much! I immediately try
Bookmarks