firmware image R13.000.7893 for mtp850 380mhz

[vr10]

Hi edyasia! My radio to wait for repairs,

[edyasia]

Hey Groott Are you there??? yujuuuuuu!!! jejeje

Vr10 what firmware already have your radio??? i have r13007412. its good for you???

[vr10]

edyasia! You mean! r130007412 flash radio ok

[vr10]

My radio USB error

[edyasia]

yes. i have z19 7412..

Usb problem is radio port contacts dirty... clean it with a toothbrush and alcohol 99%... only two drops in toothbrush. and very gently a small neddle to clean hard solids. With radio buttons up at the left are 3 pins for charging, next the rest. only make shure to clean the first 4 pins from left to right (gnd, D+, D-, Usb Vbus+) and the last one at the right (gnd) .


Sorry my english

[vr10]

Hi edyasia ! Means that do not install the battery flash？

[vr10]

My radio Screen (FDI FLASH is empty!)Please help

[vr10]

Hi edyasia！I want to test r130007412 can it?I can reconnect with RS232 flash cable radio

[Groott]

Firmware should be for the MTP850. Do you have MTP850? or do you have MTP850S?
MTP850S firmware should be R31.xxx.xxxx
MTP850EX firmware should be start with R15.
MTP850S has accesoiresconnector on the side.

[edyasia]

Hi groott. i have MTP850 acc connector on the bottom of the radio. same data cable ******** cellphone v60-v66-v6. I put flash on the adequate directory.... When i try flash it cps say "found no software for current radio model (-90)" IMG-20120927-01067.jpgIMG-20120927-01068.jpgIMG-20120927-01069.jpgIMG-20120927-01070.jpgIMG-20120927-01072.jpg