Export Radio Topology Issue

[tech_frk]

Need a little help Snr Members,

Is there any way to export radio network topology from the command prompt instead of getting it from the common explorer of E// OSS.

[tech_frk]

The Reason i want it because most of the time the Common Explorer doesnt open.

[wernfried]

Try this command: /opt/e*******/nms_umts_wran_bcg/bin/start_rah_export.sh radio

Kind Regards

[tech_frk]

Thanks for the response, i tried the command you mentioned it says Export Cancelled.Below is the output for your reference.

/opt/e*******/nms_umts_wran_bcg/bin/start_rah_export.sh radio

Export Filename will be: UTRAN_TOPOLOGY.xml

Included global environment settings
Included local environment settings else
NetworkName is found in system env, value = SubNetwork=ONRM_RootMo_R
Executing /opt/sun/jdk/java/bin/java -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/ossrc/upgrade/JREheapdumps -Dcom.sun.management.jmxremote -DORBInitRef=NameService=iioploc://masterservice:12468/NameService -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORBSingleton -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dborland.enterprise.licenseDefaultDir=/opt/borland/bes/license -Dborland.enterprise.licenseDir=/home/vm516w/etc/vbroker/glne1cx2 -Dvbroker.orb.enableServerManager=true -Dvbroker.security.server.ssl.handshakeTimeout=0 -Djava.endorsed.dirs=/opt/borland/bes/lib/endorsed -Dsun.rmi.dgc.server.gcInterval=3600000 -Dsun.rmi.dgc.client.gcInterval=3600000 -DLdapOrg=o=lmera -DLdapHost=ldap://masterservice:389 -Dse.e*******.security.PropertyFileLocation=/etc/opt/e*******/security/OSS_CSU_client_config.xml -Dse.e*******.security.JsuPropertyFileLocation=/etc/opt/e*******/security/OSS_JSU_client_config.xml -Dse.e*******.security.type=client -Dse.e*******.security.ssu.slsurls=https://10.184.18.84:8443/e*******/servlet/sls,https://10.184.18.87:8443/e*******/servlet/sls -Dse.e*******.security.ssu.authenticationenabled=true -DNetworkName=ONRM_RootMo_R -DNetworkName=ONRM_RootMo_R -Didentity=AdmDomain=e*******.se,AdmNode=E*******,AdmHost=glne1cx2,ManagedComponentrah_reg=rah_reg,Processrah_reg_corba_server=rah_reg_corba_server -DperiodicalExportSwitch=ON -DperiodicalExportFileName=UTRAN_TOPOLOGY.xml -DperiodicalExportConfigId=
-DperiodicalExportRootMOName=SubNetwork=ONRM_RootMo_R com.e*******.nms.umts.ranos.bcg.regionserver.impl.CommandLineExporter radio

Starting Periodic Export set up procedure
Failed to create exportSession.
Setting up the logger
WFWK TRACING directed to LogAgent. trace.target not set
Apr 3, 2012 6:07:29 AM com.e*******.nms.umts.ranos.bcg.regionserver.common.utils.BcgLogger logWarning
WARNING: UserId =vm516w
Apr 3, 2012 6:07:29 AM com.e*******.nms.umts.ranos.bcg.regionserver.common.utils.BcgLogger logException
SEVERE: CommandLineExporter.resolveExportCorbaObject. Failed to create exportSession:
org.omg.CORBA.INV_OBJREF: vmcid: 0x0 minor code: 0 completed: No
at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(Unknown Source)
at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(Unknown Source)
at com.inprise.vbroker.orb.DelegateImpl._bind(Unknown Source)
at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(Unknown Source)
at com.inprise.vbroker.orb.DelegateImpl.is_local(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:354)
at com.e*******.nms.umts.ranos.bcg.regionserver.iface._ExportSessionFactoryStub.createSession(_ExportSessionFactoryStub.java:77)
at com.e*******.nms.umts.ranos.bcg.regionserver.impl.CommandLineExporter.resolveExportCorbaObject(CommandLineExporter.java:154)
at com.e*******.nms.umts.ranos.bcg.regionserver.impl.CommandLineExporter.run(CommandLineExporter.java:102)
at com.e*******.nms.umts.ranos.bcg.regionserver.impl.CommandLineExporter.main(CommandLineExporter.java:76)
Export cancelled. Periodic export set up failed: Failed to create exportSession.

[wernfried]

Missing privileges?

Do you get more information when you check the logfile in /var/opt/e*******/nms_umts_wran_bcg/logs ?

Try this command:
/opt/e*******/nms_cif_sm/bin/smtool -config wran_bcg

and compare the output with our settings below. Any major differences?

Another way to export topology is this script (more documentation you should find in ALEX):

 
/opt/e*******/nms_umts_wran_bcg/bin/bcgtool.sh

No arguments were specified!
Usage: ./bcgtool.sh -h|-help
       ./bcgtool.sh -g <file>
       ./bcgtool.sh -e <file | URL> [-d <r|t|b> | <:moc_filter | filter_file>] [-s <ba|bo|bs|bn> <level>] [-v] [-report <file>] [-n FDN1 FDN2 ...] [-time date <yyyy-MM-dd hh:mm:ss>|hr <int 1-24>] [-c]
       ./bcgtool.sh -i <file | URL> [-p <plan>] [-v] [-molock] [-report <file>]
       ./bcgtool.sh -a <plan> [-startTime <yyyy-MM-ddhh:mm:ss> [-abortAtPrecheckFailure <true|false>]] [-useRobustReconfig <true|false> [-configAdmCountdown <int 300-86400>]] [-v] [-report <file>]

activityDuration                 2
administrativeState              unlocked
autoLockUnlock                   false
availabilityStatus               undefined
bctLicenceCheckTimeoutMins       10
bulkCmFilesExport                /var/opt/e*******/nms_umts_wran_bcg/files/export
bulkCmFilesExportCache           /var/opt/e*******/nms_umts_wran_bcg/files/export/cache
bulkCmFilesImport                /var/opt/e*******/nms_umts_wran_bcg/files/import
bulkCmFilesSession               /var/opt/e*******/nms_umts_wran_bcg/files/session
bulkCmLogsExport                 /var/opt/e*******/nms_umts_wran_bcg/logs/export
bulkCmLogsImport                 /var/opt/e*******/nms_umts_wran_bcg/logs/import
bulkCmLogsSession                /var/opt/e*******/nms_umts_wran_bcg/logs/session
commitAtMIBBoundary              false
commitTransactionTime            0
compressUsing                    true
ContinueExportOnNodeFailure      true
defaultSelfTests
deletecellwaittime               20
enableWarnings                   false
erbsqueuesize                    25
erbswaittime                     5
exportCSConnectionsTimeout       3600
ExportInstrumentToFile           /var/opt/e*******/nms_umts_wran_bcg/logs/export
ExportNodeIfUnsynched            true
exportRetryWaitTime              10
ExportSynchingNodes              false
exportWithWhiteSpaces            true
filterFiles                      /var/opt/e*******/nms_umts_wran_bcg/files/export/csfilters
group
idleTime                         86400000
ImportInstrumentToFile           /var/opt/e*******/nms_umts_wran_bcg/logs/import
importJmsMessageWaitTimeout      3600
importJmsProgressUpdateInterval  1000
importJmsResponseDestroyTimeout  900
importRetryWaitTime              10
importxmlschemavalidation        1
managedComponentObjectName       wran_bcg_mc
ManagedComponentwran_bcgId       wran_bcg
MapFile                          /opt/e*******/nms_umts_bcg_meta/dat
maxretry                         2
maxretryCsExportFailures         3
maxretryCsImportFailures         5
maxThreads                       128
MCContextContextId               ONRM_RootMo_R
mgwqueuesize                     5
mgwwaittime                      5
minThreads                       10
mscqueuesize                     5
mscwaittime                      5
notificationSendAttempts         5
notificationSendInterval         30
onLine                           true
operationalState                 undefined
owner
processxmlfile                   0
rahNotifConnPacingInterval       5
rahNotifConnTimeTick             10
rbsqueuesize                     100
rbswaittime                      5
retrySynchingNodes               true
rncwaittime                      10
runningState                     undefined
rxiqueuesize                     25
rxiwaittime                      5
selfTestAvailableCommon
selfTestAvailableSpecific
sessionCacheLifeTime             -1
sgsnqueuesize                    12
sgsnwaittime                     5
startOrder                       18
status
stnqueuesize                     100
stnwaittime                      5
stopOrder                        2
systemLogLevel                   coarse
tdrbswaittime                    5
tdrncwaittime                    10
tempFilesMonitorPeriod           12
threadMonitorPeriod              10
traceAvailableCommon
traceAvailableSpecific
traceStatus                      N
transactionSize                  1
transactionTimeOut               1800
transactiontimeoutvalue          500
usageState                       undefined
useConversion                    false
userFilterFiles                  /var/opt/e*******/nms_umts_wran_bcg/files/export/userfilters
userLabel                        wran_bcg
waitTimeForCStoReturn            40

Kind Regards

[tech_frk]

Thanks for the quick response, it seems i do not privileges to run smtool command,as far as command bcgtool is concerned can you give me any example i could use as i am not able to find any info in alex.

[wernfried]

Thanks for the quick response, it seems i do not privileges to run smtool command.

Ask your OSS-RC Admin! Or you can try to lauch the GUI version -> CIF Management Console or /opt/e*******/bin/smgui

Here is the doc of bcgtool:

13 BCG CLI Script

The BCG CLI script enables Import, Export and Activation operations to be performed from the command line interface. Any activities performed using the GUI may be performed using this script, with appropriate parameters and arguments. This path for BCG CLI script is: /opt/e*******/nms_umts_wran_bcg/bin/.
13.1 Syntax

In order to use BCG CLI script, users must be logged in and have appropriate user privileges.
The usage string displays the script syntax. Using standard script notation, optional parameters are enclosed in square brackets [ ], and alternative multiple arguments are separated by the | symbol. For example, the parameter -s, is optional and may be used in one of the following formats: -s ba or -s bo or -s bn or -s bs.
The usage string is as follows:

usage: ./bcgtool.sh -h|-help ./bcgtool.sh –g <file> ./bcgtool.sh -e <file | URL> [-d <r|t|b> | <:moc_filter | filter_file>] [-s <ba|bo|bs|bn> <level>] [-v] [-report <file>] [-n FDN FDN2 ...] ./bcgtool.sh -i <file | URL> [-p plan][-v] [-report <file>] ./bcgtool.sh -a <plan> [-startTime <yyyy-MM-ddhh:mm:ss> [-abortAtPrecheckFailure <true|false>]] [-useRobustReconfig <true|false> [-configAdmCountdown <int 300-86400>]][-v] [-report <file>] [-v] [-report <file>]

The usage string indicates that BCG CLI script may be used in one of the following ways:
./bcgtool.sh -h|-help
OR
./bcgtool.sh –g <file>
OR
./bcgtool.sh -e <file | URL> [-d <r|t|b|><:moc_filter | filter_file>] [-s <ba|bo|bn|bs> <level>] [-v] [-report <file>] [-n <FDN1 FDN2 ...]
OR
./bcgtool.sh -i <file | URL> [-p <plan>] [-v] [-report <file>]
OR
./bcgtool.sh -a <plan> [-startTime <yyyy-MM-ddhh:mm:ss> [-abortAtPrecheckFailure <true|false>]] [-useRobustReconfig <true|false> [-configAdmCountdown <int 300-86400>]][-v] [-report <file>]
Use of an invalid combination of parameters results in the display of an appropriate exit code in the console.
13.2 Script Parameters and Arguments

The BCG CLI script requires at least one parameter. The parameters determine which function the script performs. Use optional parameters, where allowed by the script's syntax rules, to modify the default behavior of the script.
13.2.1 Parameters

At least one parameter must always be used with the BCG CLI script. The acceptable BCG CLI script parameters are:

• -h|-help Use any of the help parameters with the BCG script to display the usage string, as shown in Section 13.1.

OR

• -e Use this parameter to perform an export operation using the BCG script. This parameter must be followed by a mandatory file | URL argument, a well formed URL or file name. Optional parameters: the domain parameter -d, the scope parameter -s, the verbose parameter -v, the report parameter, -report and the FDN parameter, -n, may be used with the export parameter.

OR

• -i Use this parameter to perform an import operation using BCG CLI script. This parameter must be followed by a mandatory file | URL argument, specifying the import xml file. The -i parameter may optionally be followed by the following parameters: plan, -p , verbose -v , report -report.

OR

• –g Use this parameter to specify a file containing operation parameters. If a full file path is not specified, the script uses the custom filter path ( see Section 11.3) as the default. The file may contain parameters necessary to perform Bulk Configuration CLI operations, that is, export, import and activation. Only a file argument that points to a valid file, can be used with this parameter. Each command must be on a separate line in this file.

OR

• -a Use this parameter to perform an activation of a planned configuration. This parameter must be followed by a mandatory plan argument, specifying an existing planned configuration.

Any parameter used with the BCG script, that does not match any of these activities, causes an error message and the usage string to displayed.
13.2.2 Optional Parameters and Arguments

A number of optional script parameters may be used to further modify the default behavior of the script:

• -p Use the plan parameter, -p, (always followed by the plan argument) to denote the planned configuration that the operation is performed on.
• -report Use the report parameter, -report, (always followed by the file argument) to define the location where the report file is written to. The report file contains the information that is output to the console for the CLI operation. The default report location is: var/opt/e*******/nms_umts_wran_bcg/.
• -d r|t|b|:moc_filter|filter_file Use the domain parameter, -d, to refine the scope of an export operation. Use the domain parameter to limit the export to specific MO types: r radio or t transport, or b, both moc_filter managed object class and filter_file a filter file. When a managed object class filter is used, only the named MO class, and any child MOs it contains, are exported. A filter file parameter only exports the MOs types listed in the argument file (including all contained child MOs).
• -s ba|bs|bo|bn <level> Use the scope parameter, -s, to set the scope requirements.
  Use the following arguments with this parameter:
  
  • ba - Base All: This scope includes the starting point MO and all MOs below it. With this argument, any specified level argument is ignored.
  • bo - Base Only: This scope includes only the starting point MO. With this argument, any specified level argument is ignored.
  • bn - Base N: This scope only includes MOs that are exactly n levels below the starting point MO, n being the value specified in the level argument.
  • bs - Base Sub-Tree: This scope includes the starting point MO and all MOs below it down to the specified level from Sub-tree level 1.
  • level - An integer value representing the number of levels to be included in the scope.
  
  
• -v Use the verbose mode parameter, -v, to switch verbose mode on or off. If verbose mode is on, more detailed log information is displayed in the console. If verbose mode is switched off, BCG CLI script runs in silent mode and only displays severe warnings.
• -n FDN1 FDN2 Use the FDN parameter -n, to identify the start point MO for a BCG CLI operation.
• plan Use the plan argument with the, activate -a, import -i or plan -p, parameters, to identify the planned configuration for the operation. The planned configuration must exist for use with the export and activate parameters.
• file | URL Use the file | URL argument to specify the file as one of the following:
  
  • A file name
  • A file path
  • An FTP location
  
  The BCG application uses default locations, described in, Section 10 and Section 11, defined by a Managed Component parameter, for import and export files. The default location is determined by the BCG script by reading the system parameters. All files used with BCG script must be well formed, valid XML files.
  If a file name only is specified, the script expects to find the file in the relevant default location. If an absolute path to a file, elsewhere on the file system, is specified, the file is automatically copied to the relevant default location. If an FTP location is specified, the file is automatically copied to the default location. The file location specified is validated by the BCG script to ensure that:
  
  
  • If it is a preexisting file, that it can be written to or read from
  
  OR
  
  
  
  • If it does not already exist, that it can be created (export case only)
  
  
• -startTime <yyyy-MM-ddhh:mm:ss> Use the parameter –startTime to specify the time for activating a plan. The time should be specified in the format yyyy-MM-ddhh:mm:ss and this time should not be earlier than the current time.
• -abortAtPrecheckFailure <true|false> Use the parameter –abortAtPrecheckFailure to specify whether the activation should be stopped or allowed to continue in the case of precheck failure. This parameter can contain the value of either true or false.
  If abortAtPrecheckFailure is set to true then the activation stops if a precheck failure is encountered.
  If abortAtPrecheckFailure is set to false, or is not included in the command, then the activation continues even if there are Network Elements that failed the pre-check.

13.2.3 CLI Examples

The following examples illustrate parameter and argument usage.
13.2.3.1 Using the -g Command

The commands shown in Example 4, are contained in a file. This file may be used with the -g parameter as shown in Example 5. BCG CLI script processes the file contents and interprets the contained commands, exporting transport domain MOs from RNC03 to the export file ExportFile.xml.
Example 4 Sample Command File

-e /var/opt/e*******/nms_umts_wran_bcg/files/export/ExportFile.xml -d t -n SubNetwork=ONRM_ROOT_MO_R, SubNetwork=RNC03,MeContext=RNC03
Note: Each command must be on a separate line in the file.
Example 5 Sample Usage

./bcgtool.sh -g /var/opt/e*******/nms_umts_wran_bcg/ files/export/ExportCommandFile.xml
13.2.3.2 Using the -e Command

The BCG script CLI command in Example 6, exports radio domain MOs from the valid configuration, starting with the FDN: RNC03. The resultant export file, ExportFile.xml, is stored in the directory /var/opt/e*******/nms_umts_wran_bcg/files/export/.
Example 6 Sample Export

./bcgtool.sh -e /var/opt/e*******/nms_umts_wran_bcg/files/export/ExportFile.xml -d r -n SubNetwork=ONRM_ROOT_MO_R, SubNetwork=RNC03,MeContext=RNC03
The BCG script CLI command in Example 7 exports radio domain MOs from the Network Elements RNC03 and RNC02. The resultant export file, Export_MultipleNE.xml is stored in the default export file directory:
/var/opt/e*******/nms_umts_wran_bcg/files/export/
Example 7 Sample MultipleNetwork Elementexports

./bcgtool.sh -e Export_MultipleNE.xml -d r -n SubNetwork=ONRM_ROOT_MO_R,SubNetwork=RNC03,MeContext=RNC03 SubNetwork=ONRM_ROOT_MO_R,SubNetwork=RNC02,MeContext=RNC02
13.2.3.3 Using the -i Command

The BCG script CLI command in Example 8 imports the contents of TestImport.xml into the planned configuration TestImportConfiguration. The report file, TestImportReportFile.txt for this operation is stored in the directory /var/opt/e*******/nms_umts_wran_bcg/logs/import/importreports/.
Example 8 Sample Import

./bcgtool.sh -i /var/opt/e*******/nms_umts_wran_bcg/files/import/TestImport.xml -p TestImportConfiguration -v -report /var/opt/e*******/nms_umts_wran_bcg/files/ logs/import/importreports/TestImportReportFile.txt
13.2.3.4 Using the -a Command

The BCG script CLI command in Example 9 activates the TestImportConfiguration planned configuration. The report file, ActivatePlanReportFile.txt for this operation is stored in the directory: /var/opt/e*******/nms_umts_wran_bcg/logs/.
Example 9 Sample Activation

./bcgtool.sh -a TestImportConfiguration -v -report /var/opt/e*******/nms_umts_wran_bcg/ logs/ActivatePlanReportFile.txt
The BCG script CLI command in Example 10 schedules the activation of the TestImportConfiguration planned configuration at the date/time specified (10th Nov 2008 at 20 Hrs).
The activation of the plan stops if the pre-check fails since abortAtPrecheckFailure is set to true.
The report file for this operation is stored in the directory:
/var/opt/e*******/nms_umts_wran_bcg/logs/
Example 10 Sample Scheduled Activation

./bcgtool.sh –a TestImportConfiguration –startTime 2008-11-1020:00:00 -abortAtPrecheckFailure true –v –report /var/opt/e*******/nms_umts_wran_bcg/ logs/ScheduledActivatePlanReportFile.txt