Aircom SFH_Strategy_Planning

[rfoptman]

The following document of AIRCOM summarizes possible configurations with different number of frequencies reused with 1x1 and 1x3 patterns, together with the capacity increases achieved in each case. The contents are:

A. SFH DESIGN.. 4
A.1 Loading Factors. 5
A.2 General comparison of 1x1 and 1x3 patterns. 5
A.2.1 Comparison of 1x3 and 1x1 planning. 5
A.2.2 Advantages and Disadvantages of 1x1 and 1x3: 6
A.2.3 Preparation for SFH Deployment: 6
B. PREREQUISITES FOR SFH IMPLEMENTATION.. 8
B.1 COVERAGE OPTIMISATION.. 8
B.2 TOPOLOGY OPTIMISATION.. 10
B.3 HARDWARE REQUIREMENT: 10
B.4 DEPLOYMENT STRATEGY.. 11
B.4.1 INITIAL DEPLOYMENT.. 11
B.4.2 HOPPING EXPANSION.. 13

[EngSoft]

The following document of AIRCOM summarizes possible configurations with different number of frequencies reused with 1x1 and 1x3 patterns, together with the capacity increases achieved in each case. The contents are:

A. SFH DESIGN.. 4
A.1 Loading Factors. 5
A.2 General comparison of 1x1 and 1x3 patterns. 5
A.2.1 Comparison of 1x3 and 1x1 planning. 5
A.2.2 Advantages and Disadvantages of 1x1 and 1x3: 6
A.2.3 Preparation for SFH Deployment: 6
B. PREREQUISITES FOR SFH IMPLEMENTATION.. 8
B.1 COVERAGE OPTIMISATION.. 8
B.2 TOPOLOGY OPTIMISATION.. 10
B.3 HARDWARE REQUIREMENT: 10
B.4 DEPLOYMENT STRATEGY.. 11
B.4.1 INITIAL DEPLOYMENT.. 11
B.4.2 HOPPING EXPANSION.. 13

Seems good doc , do you have any thing for FLP Freq planning 1/1 and 1/3 ?

[rfoptman]

I recommend attached files from E******* regarding FLP frequency planning.

[rfoptman]

@EngSoft, You can try this post too:
http://www.finetopix.com/showthread....uency+planning