Mutikey Ver 19.1.9 32bit 64bi

[vunguyenthanh07]

http://www.mediafire.com/?5xey49s6v2n2864

[ninoy_122184]

http://www.mediafire.com/?5xey49s6v2n2864

what is this for?

[phihung]

That is still not public and you can easily download from here any version...

http://testprotect.com/download

[synkro]

what is this for?

dongle emulation

[amila4341]

could any one post some tutorial how multi key is used to emulation

[phihung]

How to emulate SuperPRO dongle in 64 bit Windows using MultiKey ( Windows 7 64bit, Vista 64bit, XP 64bit)
Important!
You also need access to a 32 bit OS.
If you are using Windows 7 64bit or Windows Vista 64bit, you need to disable driver signing with "Driver Signature Enforcement Overrider" tool (included also in Program package download below or you can download it from original site Download Page. Use this Tool to sign the multikey.sys driver file after installing MultiKey x64, the file is located in C:\Windows\System32\Drivers\multikey.sys
If you don't sign the file, windows wont let you install the driver unsigned. Also with this tool you need to activate Test Mode for Windows.
Programs needed:
- SENTEMUL2007 (if you only have a *.dng dump file)
- MultiKeyEmu x64 v. 0.18.0.3 (with x64 devcon.exe)
- Git's tool dmp2mkey v 2.3 (dmp2mkey.exe)
- PVA v 3.3 (sprodmp.exe)

Where to get all the programs at once (the files are clean, sentemul2007 replaced with original EDGE-FIXED release):
Download Rapidshare.com
Download Hotfile.com
Download Megaupload.com

1. Get the *.dmp dump file from your dongle:
a) if you already have a *.dng dump file:In 32 bit OS emulate your dongle (start "Sentemul2007.exe" --> install driver --> load dump.dng --> start service)
b) if you have a dongle, move to 2.

2. Still in 32 bit OS, use PVA sprodmp.exe without brute WP option to dump the (emulated) dongle data – you should get a *.dmp file.

3. Still in 32 bit OS, execute Git's Tool "dmp2mkey.exe" Use to make a *.reg file. Make sure the path is correct, looks like this:
Uploaded with ImageS****.us

4. Now move to your 64 bit system, there install the .reg file (by doubleclick on it and select “to reg” or right click on it and "Merge"). Then in regedit should look something like this:

5. Download and install the latest Sentinel Drivers.

5. Make a new folder, example "C:\MultiKey"

6. Copy the files from MultiKey64 folder (MultiKeyEmu) to the "C:\MultiKey\" folder. (in this attached archive the devcon.exe has already been replaced to match the x64 architecture.)

7. In Multikey folder execute "install.cmd". You should get a message in dos window: " Driver Installed Sucessfully." If you get "devcon failed" error, use another devcon.exe (overwrite the old one in MultiKey folder) that matches your PC architecture (amd64, ia64). And if everithing worked out fine you should now see a notification about a new hardware being installed.

All done! Check in the Device Manager under Universal Serial Bus Controllers, there you should see a SafeNet USB SuperPro/UltraPro installed.How to emulate SuperPRO dongle in 64 bit Windows using MultiKey ( Windows 7 64bit, Vista 64bit, XP 64bit)
Important!
===========================================================================
How to emulate SuperPRO dongle in 32 bit Windows using MultiKey ( Windows 7, Vista, XP)

Programs needed:
- SENTEMUL2007 (if you only have a *.dng dump file)
- MultiKeyEmu x32 v. 0.18.0.3 (with x32 devcon.exe)
- Git's tool dmp2mkey v 2.3 (dmp2mkey.exe)
- PVA v 3.3 (sprodmp.exe)

Where to get all the programs at once (the files are clean, sentemul2007 replaced with original EDGE-FIXED release):
Download Rapidshare.com
Download Hotfile.com
Download Megaupload.com

1. Get the *.dmp dump file from your dongle:
a) if you already have a *.dng dump file:In 32 bit OS emulate your dongle (start "Sentemul2007.exe" --> install driver --> load dump.dng --> start service)
b) if you have a dongle, move to 2.

2. Still in 32 bit OS, use PVA sprodmp.exe without brute WP option to dump the (emulated) dongle data – you should get a *.dmp file.

3. Still in 32 bit OS, execute Git's Tool "dmp2mkey.exe" Use to make a *.reg file. Make sure the path is correct, looks like this:
Uploaded with ImageS****.us

4. there install the .reg file (by doubleclick on it and select “to reg” or right click on it and "Merge"). Then in regedit should look something like this:

5. Download and install the latest Sentinel Drivers.

5. Make a new folder, example "C:\MultiKey"

6. Copy the files from MultiKey32 folder (MultiKeyEmu) to the "C:\MultiKey\" folder. (in this attached archive the devcon.exe has already been replaced to match the x32 architecture.)

7. In Multikey folder execute "install.cmd". You should get a message in dos window: " Driver Installed Sucessfully." If you get "devcon failed" error, use another devcon.exe overwrite the old one in MultiKey folder). And if everithing worked out fine you should now see a notification about a new hardware being installed.

[mashi123]

this site http://testprotect.com/download is good but files are pass protected / how to get pass for rar files

[amila4341]

password is testprotect.com

[mashi123]

Thanks a lot found the pass after translating the Russian language
but anyway still some thing missing the site contains the emulators and dumpers , but where is the tools to convert dmp files to registry , i have SRM dump , what kind of tool is used to convert SRM dump files

[hp3hp3]

Thanks a lot found the pass after translating the Russian language
but anyway still some thing missing the site contains the emulators and dumpers , but where is the tools to convert dmp files to registry , i have SRM dump , what kind of tool is used to convert SRM dump files

this not free for SRM