-
Member
Reputation: 187
KPI values for LTE network
Dear forum
I would like to ask if someone can be share some recommendation values for measure a LTE network KPIs for the radio side. I have the following KPIs but i need some values
A. Service Experienceffice
ffice" />>>
a. Throughput>>
i. Average number of default, dedicated and total bearers in cell>>
ii. Minimum and peak numbers of default, dedicated, and total bearers in cell>>
iii. Average and peak number of bearers allocated per CQI>>
iv. Average and peak number of Resource Blocks and Subframe allocated per QCI>>
v. Average throughput for user and cell (DL/UL)>>
vi. Peak throughput for user and cell (DL/UL)>>
vii. CQI distribution (DL)>>
viii. (C/I) distribution (UL)>>
b. BLER>>
i. Block Error Rate (BLER) per bearer>>
c. Latency>>
i. Attach Time>>
ii. Average latency per CQI or Service Request [EPS] Time>>
iii. Maximum and minimum latency per CQI>>
iv. Service Access Time>>
v. Paging Time>>
vi. Round Trip Time (RTT)>>
B. Accessibility>>
a. Connection drop rate>>
i. Percent of failed random access attempts or Attach Success Rate>>
ii. Percent of failure RRC connection setups or Service Request [EPS] Success Rate>>
iii. Percent of paging failures>>
iv. Connection setup delay or Service Accessibility Ratio>>
v. Paging delay or Paging Failure Rate>>
C. Retainability>>
a. Completed Session Ratio>>
b. Connection Drop Rate or Service [EPS] Drop rate>>
i. Percent of dropped RRC connections (SRBs and DRB for default bearer)>>
ii. Percent of dropped connections per CQI (DRBs for dedicated bearers)>>
iii. Packet Loss Rate (PLR)>>
D. mobility>>
a. Success Rate>>
i. Handover Success Rate>>
Could you please share with me?
I will apppreciate
-
2011-10-27 09:16 PM
# ADS
Circuit advertisement
Bookmarks