-
Member
Reputation: 15
2 TX in RBS 2111 using 1 omni anteena
good day
anybody help me how to connect RBS 2111 to omni antenna
(one single feeder ) with 2 TX configuration
RXB is requested as OMT show ???
-
2011-10-04 07:28 PM
# ADS
Circuit advertisement
-
Member
Reputation: 17
Re: 2 TX in RBS 2111 using 1 omni anteena
Originally Posted by
bashar0002
good day
anybody help me how to connect RBS 2111 to omni antenna
(one single feeder ) with 2 TX configuration
RXB is requested as OMT show ???
Hi,
Have you found the answer for your queries? Am having the some problem now. Site is integrated, but the signal quality is not good, and drop calls too.
BR///
Edmar
-
Member
Reputation: 127
Re: 2 TX in RBS 2111 using 1 omni anteena
I think you need to install 3dB hypridcoupler to solve your problem.
This will let you have two o/p TX&RX per each o/p.
Check and let us know if your problem is solved.
-
Member
Reputation: 17
Re: 2 TX in RBS 2111 using 1 omni anteena
Originally Posted by
E*******_RND
I think you need to install 3dB hypridcoupler to solve your problem.
This will let you have two o/p TX&RX per each o/p.
Check and let us know if your problem is solved.
Hi,
Thanks for the reply, but it is already working the day after i post this one. It is configured with a basic 1 sector configuration of 2111 on omt, with antenna 1 and antenna2 port on RRU connected to a two way splitter,each. A total of 4 omni antenna is installed inside the building. I request a reload on integrator side and after that, voice call issue were fixed.
BR///
Edmar
Bookmarks