Many thanks. Very useful.
I have some requests:
1) Do you have the last official roadmap for 950 and 980 ? I am interested in some features and from when they are available.
2) Do you know if migration from Hybrid (Native E1 + Native Ethernet) to Packet(all IP) can be done only by software without changing any card? Can this card named CSH/950 and CSHN/980 do this?
3) Do you know from what version of V100R003_ _ this migration can be done for 950 and 980?
4) Do you know if there are any constraints in choosing cards and finally in function if XPIC is used for Hybrid or Packet ?
Many thanks. Very useful.
I have some requests:
1) Do you have the last official roadmap for 950 and 980 ? I am interested in some features and from when they are available.
2) Do you know if migration from Hybrid (Native E1 + Native Ethernet) to Packet(all IP) can be done only by software without changing any card? Can this card named CSH/950 and CSHN/980 do this?
It can be done only by software.
3) Do you know from what version of V100R003_ _ this migration can be done for 950 and 980?
V100R003C00SPC100, im not sure if with other versíon you can do it... i think so.
4) Do you know if there are any constraints in choosing cards and finally in function if XPIC is used for Hybrid or Packet ?
XPIC can be used for both
Best regards
2) Do you know if migration from Hybrid (Native E1 + Native Ethernet) to Packet(all IP) can be done only by software without changing any card? Can this card named CSH/950 and CSHN/980 do this?
It can be done only by software.
3) Do you know from what version of V100R003_ _ this migration can be done for 950 and 980?
V100R003C00SPC100, im not sure if with other versíon you can do it... i think so.
4) Do you know if there are any constraints in choosing cards and finally in function if XPIC is used for Hybrid or Packet ?
Thank you mcmardigan.
1) Do you know if V100R003C02_01 can be newer than V100R003C00SPC100 ?
2) Does SPC mean dual functioning Hybrid and Packet or something else ?
3) Do you know if the chassis assembley of 950 and 980 comes embedded with power module PIU ? If yes, it comes with both (redundant) PIU or with only one and the other has to be orderd separately.
It seems there is a limitation in using XPIC with ISX2 card: this do not work with channel spacing of 7 and 14 MHz.
Thank you mcmardigan.
1) Do you know if V100R003C02_01 can be newer than V100R003C00SPC100 ?
2) Does SPC mean dual functioning Hybrid and Packet or something else ?
3) Do you know if the chassis assembley of 950 and 980 comes embedded with power module PIU ? If yes, it comes with both (redundant) PIU or with only one and the other has to be orderd separately.
It seems there is a limitation in using XPIC with ISX2 card: this do not work with channel spacing of 7 and 14 MHz.
1) Do you know if
1) Do you know if V100R003C02_01 can be newer than V100R003C00SPC100 ?
V100R003C02_01 This version is newer that V10..... SPC100
2) Does SPC mean dual functioning Hybrid and Packet or something else ?
No, i don't know what means... it's just version name...
3) Do you know if the chassis assembley of 950 and 980 comes embedded with power module PIU ? If yes, it comes with both (redundant) PIU or with only one and the other has to be orderd separately.
Yes, 950 and 980 have 2 PIU.
It seems there is a limitation in using XPIC with ISX2 card: this do not work with channel spacing of 7 and 14 MHz
Yes, not possible use that freq. in XPIC.
Bookmarks