Change timer T305 and T308 in E///

[Ericsson_RND]

Hi Imran;

Thanks , but can you let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******

T305 + 2*T308 < (N200+1)*T200[/QUOTE]

[crisnspro]

short the MSC timer T305 and T308, will decrease the TCH DCR, 8 years ago, I tried it, nothing help about customer experience, this is a Chinese "Invention".

[road2nowhere]

U r right crisnspro....it was implemented in ChinaMobile first..but now they have changed it back.....

we implemented with one huawei and one e******* network.......both times.....dcr came crashing down ....but when we explained to the operators how it happened...they reverted it back...and rightly so !!!

[radenmohawk]

Hi All,

As your experienced, After change timer T305 and T308 on core, does it need to soft reset the BSC's ?

[road2nowhere]

Hi, there's no need for that

[Ericsson_RND]

Dear All;

Thanks , but can you let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******

T305 + 2*T308 < (N200+1)*T200

[Ericsson_RND]

Gentelmen;

Please your kind support to let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******

T305 + 2*T308 < (N200+1)*T200

[anujswitch]

i am not able to view the attached file

[stream19]

the formula is T305 + 2*T308 > (N200+1)*T200 because with your formula you are hiding some drops especially when you reduce too much the T308.

[iara]

Hi pl go through attachement..it is detailed explaination.

i recieevd it from E*******.!

it includes commands to change too..!

Anybody have ALEX document describing these command. This is need to do impact analysis for changing these parameters.