RET Check Help......

[vayu_don]

Hey guys,
I have to check if the RET Address is up or not,usually what i have to do is check each and every address by typing the address in the Internet explorer.
There are 100 sites to be checked so is there any way to make it easy.

[s52d]

Hey guys,
I have to check if the RET Address is up or not,usually what i have to do is check each and every address by typing the address in the Internet explorer.
There are 100 sites to be checked so is there any way to make it easy.

on unix/linux:

man expect

[filDim]

Hey guys,
I have to check if the RET Address is up or not,usually what i have to do is check each and every address by typing the address in the Internet explorer.
There are 100 sites to be checked so is there any way to make it easy.

Get an utility like this: sMonitor

[revolution]

HI

Which Vendor NodeB You are using .

There are different tricks to do that !!!

Best regards

[vayu_don]

for E******* RBS

[revolution]

I know how to do ti with Huawei .

The idea is to write down XML script , or just word script and convert it to XML and run this at the time You want and save the results in certain fille .
for example :

Run the command which will give You the actual or current E tilt .
If results is positive and correct according to Ur setting , that means that RET is working probably .

Or during the off peaks , Maintenance window , change the E tilt and return it back to the required value , U can check if all motors are working or not .
In the same way using script and save the output .

just u need one of the RNC guys how to do the script
BR