TEMS ACTIVATION K790i GDFS

[simri2god]

Understood !
Can i flash cripted files (*.ssw) with setool2Lite ?
Thanks !

Depends if the file begin /start with CrYpTv12 = Encrypted = No

How to check:
Open or add the file to rar, and open with WinRAR and use View button.
You can use Hexeditor to View

Encrypted
http://img.techpowerup.org/090515/check_1.jpg
http://img.techpowerup.org/090515/check_2.jpg

Normal uncrypted BABE flash file
http://img.techpowerup.org/090515/check_3.jpg
http://img.techpowerup.org/090515/check_4.jpg

[adika]

Depends if the file begin /start with CrYpTv12 = Encrypted = No


You can use Hexeditor to View



Normal uncrypted BABE flash file
http://img.techpowerup.org/090515/check_3.jpg
[

Understood ! Not all *.ssw files are encrypted !
In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ?
I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ?

Tnx !

[simri2god]

Understood ! Not all *.ssw files are encrypted !
In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ?
I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ?

Tnx !

Not all *.ssw files are encrypted ! Yes correct.

In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ? No

I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ? No dont works.

Only on brown phones read flash is supported.

[Lesmana]

but my frnd , i cannot identify my phone by setool2lite v1.11, plse let me know which tools used and how
thanks inavdanced...
rahimkhan99@yahoo.com

What did u do in previous steps ?
or its a new phone ?
Is the phone working as a normal K790i or its dead?

[lyzj2001]

It works well, thanks

[adika]

Hi !
What customisation file needs tems on K800 ?
The flash process normally needs tems main, tems fs. What about custom file(s) ?

Finally i cought one K800 ! I read out the gdfs first with Setool2Lite and after with XS++. The two files not match... They are in the files two bytes who are different. Why ? This is normal ?

[adika]

I forgot to ask !
K800 with the Tems flash files is working also in 3G with Tems investigation ?
And in Tems pocket mode ?

Thanks !

[netscape]

hi there.
I have k790i CID 52. I flash it with tems firmware R2B but in the end of procedure flash, error appear:
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:413 secs.
Wrong to flash into my K790.
Plz help me.
P/S: I've test OK connection between phone and PC because when i reflash with file CID 52, it work on.

[simri2god]

hi there.
I have k790i CID 52. I flash it with tems firmware R2B but in the end of procedure flash, error appear:
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:413 secs.
Wrong to flash into my K790.
Plz help me.
P/S: I've test OK connection between phone and PC because when i reflash with file CID 52, it work on.

How do you connect phone? Only connect via c button, don't use 2+5 button (BOOTROM) and alternative security bypass.

[netscape]

thank you, yes, I connect PC with press & hold C, not BOTTROM (2+5). I tried both SETOOL Full (setool 3) and SEtool Lite 1.11 (Alternative Secirity Bypass) but it's not work. PLZ help me.