externalgsmcell in e*******

[vasili_koslov]

How I can export externalgsmcell from RNC dump in E******* ? externalgsmcell is not provided with TEI tool and Nexplorer can filter externalgsmcell but result is empty. Please help .


Best regards.

[rne_battou]

Greetings
You can use an Advanced filter in the Export NE window in OSS

[jackkarpar]

How I can export externalgsmcell from RNC dump in E******* ? externalgsmcell is not provided with TEI tool and Nexplorer can filter externalgsmcell but result is empty. Please help .


Best regards.

in amos, use commnd "pr externalgsmcell" or "get externalgsmcell xx" for more specific parameter

[kryptonic]

Export MO: ExternalGsmCell

The MO's are case sensitive and should have the correct upper or lower case, this goes for all MO filters being applied.

[9waves.9waves]

From MOshell
command
lpr gsmrelation it will give you all relation.

[milan_recj]

In moshell enter into RNC and then:-

lget utrancell=(node-B name) utrancellref utrancellref: To find neighbouring cell 3G

lget utrancell=(node-B) gsmcellref : To find neighbouring cell 2G

lpr utrancell=(node-B) utranrelation : To find all relation Utrancell & GSM

[fon909]

In TEI tool:

on 'MO' Tab select only 'ExternalGsmCell' MO, deselect all others and that should work.

If it doesn't then try collecting BULK CM again and repeat above procedure.
If it still doesn't work then you can share it with me and I shall check it at my end, to make sure whether it is TEI tool or BULK CM creating problem.



Thanks..

[vasili_koslov]

Hi brother,

I tried with TEI but MO filter filter tab not include "externalgsmcell" .I will send pass for bulk file to you with email .And bulk file is down .Please quickly repply again.Thanks.

Best Regards.

In TEI tool:

on 'MO' Tab select only 'ExternalGsmCell' MO, deselect all others and that should work.

If it doesn't then try collecting BULK CM again and repeat above procedure.
If it still doesn't work then you can share it with me and I shall check it at my end, to make sure whether it is TEI tool or BULK CM creating problem.



Thanks..

[fon909]

Hi Vasili,


You are right, 'ExternalGsmCells' option is not visible after applying the filter. I would suggest to take another CM BULK from the ONRM and make sure you include all the elements.

[vasili_koslov]

How I can take including all elements? Already I exported all RNC network but result not include externallgsmcell.Please share a cm bulk file including externallgsmcell ?

Hi Vasili,


You are right, 'ExternalGsmCells' option is not visible after applying the filter. I would suggest to take another CM BULK from the ONRM and make sure you include all the elements.