Thanks Thanks:  0
Showing results 1 to 1 of 1

Thread: ACTIX - interference analysis

  1. #1
    Member Reputation: 38
    Join Date
    2009-03-01
    Location
    Hyderabad, India
    Posts
    113


    Default ACTIX - interference analysis

    What is the best way to go for interference analysis
    Effects:
    a. Could HO be affected due to interference apart from Call drops and call setup failures?
    b. Suppose my region is covered by ARFCN X and there are no interfering X-1 and X+1, but there could be some other ARFCNs (say Y, Y+1) with lower signal strength that also covers the given area and they cause interference. Should this be taken into account for interference analysis?
    c. What should be minimum difference between the signal levels of the victim and the interferer in case of a. co-channel b. adjacent-channel.
    Ie: effects when victim is at -70 dBm and interferer at -94 dBm or when its -70 and -74.

    d. what is the strategy when there is a chain of interferers: victim's ARFCN is X and is interfered by X+1 which in turn is interfered by X+2

    Currently, I see servCI along with RxQual and for the regions where RxQual is bad, I check servCI with sector handles of cells that have corresponding coverage.


    Regards!!

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •