what the best way for Data drive test?

[raid75]

Dears,

what the good way to do data test or penchmarking for Data while the UE staionary or in mobility?

[sedicla]

You need to be more specific because there's lots of diferent tests to do.
Whath do you expect from the tests.

[patek1968]

Be more specific on what tests you are supposed to do..

[ching2-o]

be specific and sometimes it will depend on the vendor's/operator's procedure how will you collect drivetest data

[raid75]

Dears,

The purpose of the test is to test data download in the DL.

[boriszlav]

From operator side it's better to make measurement in mobility, cause then you have more data related handovers...stationary measurements need if you want to make some special test for some parameter or you want to troubleshoot some problem on one or couple of cells...

[boriszlav]

for sure, if you tell us more details what you want to measure, we can give you a right answer...

[bindi]

I would suggest do both...select some capacity/data hotspot and perform stationary testing and also select a drive route for data throughput testing while mobile.

[almoqbali36]

hi

i suggest the flowing:

1. if you are doing benchmarking with other operater, then do data test same as voice test (

2. for 3 G, is suggest to do hotspot data test, and the test better in cell peak hour

[sedicla]

I sugest both if you want info about RF and trougput.