this is my first post, and must say this is quite a comprehensive forum, i've found lots of useful information in it.
I have a specific need, which i tried but at no result. I'm using TEMS Investigation 11.0.1 and Actix Analyzer. I need to plot on Actix the Scanned (not dedicated) signal strength for a given ARFCN and BSIC. So basically i need to see the coverage of a single cell, up to where the signal arrives. the log files are from DT with TEMS, and i'm struggling to get this done. Have tried many queries, but since i'm not very accustomed with them, i'm affraid i'm not getting them wright.
this is my first post, and must say this is quite a comprehensive forum, i've found lots of useful information in it.
I have a specific need, which i tried but at no result. I'm using TEMS Investigation 11.0.1 and Actix Analyzer. I need to plot on Actix the Scanned (not dedicated) signal strength for a given ARFCN and BSIC. So basically i need to see the coverage of a single cell, up to where the signal arrives. the log files are from DT with TEMS, and i'm struggling to get this done. Have tried many queries, but since i'm not very accustomed with them, i'm affraid i'm not getting them wright.
Any help would be appreciated.
thanks very much
I assume you are professional ?, how come you have testing tools, and have no idea how to use them ?
this is my first post, and must say this is quite a comprehensive forum, i've found lots of useful information in it.
I have a specific need, which i tried but at no result. I'm using TEMS Investigation 11.0.1 and Actix Analyzer. I need to plot on Actix the Scanned (not dedicated) signal strength for a given ARFCN and BSIC. So basically i need to see the coverage of a single cell, up to where the signal arrives. the log files are from DT with TEMS, and i'm struggling to get this done. Have tried many queries, but since i'm not very accustomed with them, i'm affraid i'm not getting them wright.
Any help would be appreciated.
thanks very much
Actix is possible to plot all ARFCN that found in the log/stream. But i am afraid you need the scanner get your needs.
Can you share the log file and say the bcch and bsic values you want to show rxlev plot..
BR
Originally Posted by serbesi
Hello all,
this is my first post, and must say this is quite a comprehensive forum, i've found lots of useful information in it.
I have a specific need, which i tried but at no result. I'm using TEMS Investigation 11.0.1 and Actix Analyzer. I need to plot on Actix the Scanned (not dedicated) signal strength for a given ARFCN and BSIC. So basically i need to see the coverage of a single cell, up to where the signal arrives. the log files are from DT with TEMS, and i'm struggling to get this done. Have tried many queries, but since i'm not very accustomed with them, i'm affraid i'm not getting them wright.
i need the Actix plot only for ARFCN=996 and BSIC=40. The serving cellID is 41012. i need the scan plot, not the dedicated plot, so want to see during all my DT what were the RxLevs for the ARFCN and BSIC.
i need the Actix plot only for ARFCN=996 and BSIC=40. The serving cellID is 41012. i need the scan plot, not the dedicated plot, so want to see during all my DT what were the RxLevs for the ARFCN and BSIC.
i need the Actix plot only for ARFCN=996 and BSIC=40. The serving cellID is 41012. i need the scan plot, not the dedicated plot, so want to see during all my DT what were the RxLevs for the ARFCN and BSIC.
thanks ******** for the reply, but i can't access the picture you uploaded as i'm not a Member Group User yet. can you tell me what did you do exactly to get it done?
Bookmarks