HSDPA throughput fluctuate?

[prasath085]

Dear Expert,

I had a problem in HSDPA throughput, for certain time throughput value is very low it meant it comes to 0 value and after some time the value reaches the maximum throughput 2 to 3 Mbps. For that location CQI is very good value is 21 and we used Dynamic pdscch codes. value is 5 to 10.RSCP for that location is -75 to 80. Ec/Io also very good range is -3 to-6. According to my decision there is no pblm in drive side, Could u help me for this.

Vendor : Huawei
RAN : 11
Modulation : 16QAM
Channel Element :384
Iub interface : there is no conjestion.

This problem is occur in all over the network

[riyantoyadi]

See for SGSN setting timer for that

[gprastomo]

During this problem, is it move to fach or still in HSDPA ?
And you have to see the RT Power utilization. and check also whether alot unnecessary sho attempt.

br

Dear Expert,

I had a problem in HSDPA throughput, for certain time throughput value is very low it meant it comes to 0 value and after some time the value reaches the maximum throughput 2 to 3 Mbps. For that location CQI is very good value is 21 and we used Dynamic pdscch codes. value is 5 to 10.RSCP for that location is -75 to 80. Ec/Io also very good range is -3 to-6. According to my decision there is no pblm in drive side, Could u help me for this.

Vendor : Huawei
RAN : 11
Modulation : 16QAM
Channel Element :384
Iub interface : there is no conjestion.

This problem is occur in all over the network

[Irna]

i think for Cell FACH actually not zero but 8kbps or 16 kbps depend on RNC setting. if problem no congestion please also seeing signalling congestion on secondary (SCCCH). After that check your SGSN setting

[tukangoptim]

i think for Cell FACH actually not zero but 8kbps or 16 kbps depend on RNC setting. if problem no congestion please also seeing signalling congestion on secondary (SCCCH). After that check your SGSN setting

how to check SGSN setting ?
please list which setting to check, and what should be the best value ?

[tukangoptim]

During this problem, is it move to fach or still in HSDPA ?
And you have to see the RT Power utilization. and check also whether alot unnecessary sho attempt.

br

agree with Gito, its good to have minimum SHO attempt, also minimize active set number. if it is the problem, you can try increase HspaTimerLen to minimize possibility of event 1d

[riyantoyadi]

i thinks HSDPA not using SHO ?

[agenov]

Dear Expert,

I had a problem in HSDPA throughput, for certain time throughput value is very low it meant it comes to 0 value and after some time the value reaches the maximum throughput 2 to 3 Mbps. For that location CQI is very good value is 21 and we used Dynamic pdscch codes. value is 5 to 10.RSCP for that location is -75 to 80. Ec/Io also very good range is -3 to-6. According to my decision there is no pblm in drive side, Could u help me for this.

Vendor : Huawei
RAN : 11
Modulation : 16QAM
Channel Element :384
Iub interface : there is no conjestion.

This problem is occur in all over the network

Hi,

To be honest with you it is quite difficult to be said what might be the reasons for your problem without additional info. If you can provide some more information, drive tests, LMT IMSI trace or .... probably we can help you out.

BR
Alex

[tukangoptim]

i thinks HSDPA not using SHO ?

everybody knows this..

[Walid Madih]

Dear Expert,

I had a problem in HSDPA throughput, for certain time throughput value is very low it meant it comes to 0 value and after some time the value reaches the maximum throughput 2 to 3 Mbps. For that location CQI is very good value is 21 and we used Dynamic pdscch codes. value is 5 to 10.RSCP for that location is -75 to 80. Ec/Io also very good range is -3 to-6. According to my decision there is no pblm in drive side, Could u help me for this.

Vendor : Huawei
RAN : 11
Modulation : 16QAM
Channel Element :384
Iub interface : there is no conjestion.

This problem is occur in all over the network

Check the tranmission alarms or make a ping testin the Iub.
If you get 100% success in the ping test so they will be no transmission problem.

Regards,
Walid