-
help for high call drop
Hi every body
we have site in siemens system which recently increase its config(2/2/2=>2/4/3) but after that we face high call drop.
In one of the sectors I changed half of the channel from HR to FR but CDRs become worse!
in the KPI measurement files the main reason for CDR is " sequence error"
dose any body have any idea for solving this problem? please help me
thanks a lot
-
2010-12-09 07:26 AM
# ADS
Circuit advertisement
-
Member
Reputation: 44
Re: help for high call drop
Check parameter, how about freq (Use Baseband of SFH), is it clear?
Have you seen CTRX statistic (RXQUAL vs RXLEVEL)? TRX upgrade is problem.
-
Re: help for high call drop
Originally Posted by
marzie
Hi every body
we have site in siemens system which recently increase its config(2/2/2=>2/4/3) but after that we face high call drop.
In one of the sectors I changed half of the channel from HR to FR but CDRs become worse!
in the KPI measurement files the main reason for CDR is " sequence error"
dose any body have any idea for solving this problem? please help me
thanks a lot
So since it happened exactly after TRX expansion let's check the hardware at first. maybe FM team plugged some faulty TRX
-
Re: help for high call drop
This is Hardware Faulty or bad instalation.
-
Re: help for high call drop
thank you all for your reply
in this site we use hopping and the freq. are clear, also RXQUAL and RXLEVEL are normal,
about the hardware fault, do u think it would be ok if we just check the vswr and alarms?
i would check and inform you about the result
Last edited by marzie; 2010-12-09 at 01:55 PM
Bookmarks