Antenna type info in E*******

[vasili_koslov]

Hi everybody,

I need to know antenna type of cells in E******* RBS.When see from OSS Explorer,all antenna type are shown as "7" .But I dont know Kathrein manufure equivalent of E******* code.And two different antenna have a same code .What is this mean?

Please help me

[saurabh]

plz give me some repu so that i can dwnload some urgent docs...

[120945657]

Hi everybody,

I need to know antenna type of cells in E******* RBS.When see from OSS Explorer,all antenna type are shown as "7" .But I dont know Kathrein manufure equivalent of E******* code.And two different antenna have a same code .What is this mean?

Please help me

i have the same problem, now waiting for the solution.

[vasili_koslov]

I have sent a email to E******* support about this thread .And Their replies are as follows,

To get the antenna type use the element manager and you can the antenna type. However the antenna type you get is the parameter used for the RETU . So it will not give you the antenna installed there. For that you need to check the site database of the operator.
For example: antenna type 7 can be
742 215
742 236
800 10121
742 352
Etc...


Hello,
Antenna type 7 is only relevant to the RET system and cannot be used for determining exactly which antenna that is on the site.
In order to find out exactly which antenna you have at a site you need to access any other database with site relevant information.
Best regards,
Robert Stensson

[sataron]

there is answer

free image host

[vasili_koslov]

Hi sataron,
Thanks for your reply but I think you didnt understand my question. Anyway I found this problem's answer.Again thanks.

[sataron]

My table its oficial answer from E////
U can see? that Type_1 (for example) placed for 2 different antennas Kat. - but for RBS no diference, coz it use only Tilt parameters for work. And in OSS u see antenna types from this table. If u use diferent vendor u can search antennas that will be particular equal with this Kat. antennas.

[vasili_koslov]

I say same things with you.But you dont answer the question,you say my question again

For example: antenna type 7 can be
742 215
742 236
800 10121
742 352
Etc...

That question is how understand type 7 is which antenna? 742215 or 742236 or...?

And E******* Support answered my question as my previuos writed post.Their replies are as follows,

To get the antenna type use the element manager and you can the antenna type. However the antenna type you get is the parameter used for the RETU . So it will not give you the antenna installed there. For that you need to check the site database of the operator.
For example: antenna type 7 can be
742 215
742 236
800 10121
742 352
Etc...


Hello,
Antenna type 7 is only relevant to the RET system and cannot be used for determining exactly which antenna that is on the site.
In order to find out exactly which antenna you have at a site you need to access any other database with site relevant information.

[sataron]

Yes. Ur right. Im not see all messages in deep
But this table is useful for many guys