-
Junior Member
Reputation: 10
RX Quality
hi can any one tell me the reasons of bad quality..there is no interference and the level is good. still the quality is bad
-
2010-08-25 06:12 PM
# ADS
Circuit advertisement
-
Member
Reputation: 105
Re: RX Quality
Originally Posted by
Tameem
hi can any one tell me the reasons of bad quality..there is no interference and the level is good. still the quality is bad
One reason can be hardware issue.
-
Member
Reputation: 51
Re: RX Quality
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!v
Last edited by testtest; 2011-06-29 at 05:11 AM
-
Re: RX Quality
Obstruction should and would affect ur coverage (i.e Rxlevel)...this is also known as Fading
Yous should check for external interference
-
Junior Member
Reputation: 10
Re: RX Quality
Originally Posted by
Processor
Obstruction should and would affect ur coverage (i.e Rxlevel)...this is also known as Fading
Yous should check for external interference
i am still cofused
-
Member
Reputation: 105
Re: RX Quality
Originally Posted by
Tameem
i am still cofused
Tameem,
Don't confuse
Bad RxQuality can have a lot of causes, that is why you should investigate, check possibilities.
Interference
Faulty TRX
Faulty Combiner
Faulty BTS
Transmission Issue
BSC Issue
MSC Issue
Low Signal Strength
Uplink/Downlink Unbalance
Low Phone Battery
and many other reasons...
Just think that which one can be in your case. When you investigate, check Statistics Results, Alarm History from BSC in the same time. If you have any unclear question let me know.
Last edited by forumuser-2008; 2010-08-26 at 09:36 PM
-
Member
Reputation: 98
Re: RX Quality
any body have any library or standard about RxLevel in GSM network??????
thanks
-
Member
Reputation: 39
Re: RX Quality
1.if its for specific sector/cell check VSWR value or any hardware faulty
2.transmission problems (unstable link) btn BSC & BTS, high BER
3. what are values for FER & C/I?
Bookmarks