Go/NOgo drivetesting

[sakibd2k]

Hi all,

I have very few simple question. Is there anythng like Go/NoGO
drive testing ? Than what is it?

And what could be basic difference among the tools Actix analyzer,
Tems investigation and Agilent and others if any?

Thank you.

[Blacktiger]

First of All Agilent and Tems are the tools for RF Data Collection. Most of vendor using this 2 tools.

Actix is Post Processing Tool, Once data are available you can load data into actix and check the data.

Hi all,

I have very few simple question. Is there anythng like Go/NoGO
drive testing ? Than what is it?

And what could be basic difference among the tools Actix analyzer,
Tems investigation and Agilent and others if any?

Thank you.

[ppsec123]

go no go drive testing is associated with pre launch optimization. usually KPI reports are generated using Actix or similar post processing tools for site acceptance.

Tems and agilent are data collection tools.

[D33T0X]

Go/No Go drive testing depends on the status of your network... do you have enough sites up for testing, etc. There's a difference between tools collecting air data and the ones used for post-processing. They are all expensive but you can live without post-processors and do everything in Mapinfo (you will need skilled engineers for that). Actix is a very useful tool but costs a lot of money...

[sakibd2k]

So go/nogo drive testing is if i have enough sites up for testing.
If enough sites are up than drive tester decide whether to go for ride is that it?

Thanks Everybody i have my answers.