Thanks Thanks:  0
Showing results 1 to 2 of 2

Thread: Access Class Restriction issue

  1. #1
    Junior Member Reputation: 13
    Join Date
    2010-08-09
    Posts
    14


    Exclamation Access Class Restriction issue

    Does anyone know how to use access class barring in a UTRAN. Details are mentioned below.

    Vendor: NSN
    Scenario:
    - UE1 (AC0-AC9 allowed, AC11,15 not allowed)
    - UE2 (AC0-AC9 not allowed, AC11,15 allowed)

    Network 1:
    - AC0-AC9 allowed. AC11,15 not allowed
    Network 2:
    - AC0-AC9 not allowed, AC11,15 allowed

    Objective:

    UE1 should always remain at Network 1.
    UE2 should always remain at Network 2.

    Problem:
    UE2 is working fine.
    UE1 is not working fine and does not camp to network 1.

    I am changing WCEL parameter ACBarredList for changes.

    BR..
    D

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 93
    Join Date
    2010-04-14
    Location
    Mexico DF
    Posts
    106


    Default Re: Access Class Restriction issue

    Case 1 should be ok, because AC0-AC9 are allowed by default. Maybe the Wcell in N1 is reserved for AC11,AC15 or check again Access Class in USIM

    if you want UE2 camp only in N2, USIM should be reserved for AC11,AC15
    if you want UE1 only attach to N1, WCEL in N2 should be reserved for operator use (only allow AC11,AC15)

    2 years ago I configured it successfullly (with huawei UTRAN)

    Regards,

    Ivan

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •