Thanks Thanks:  0
Showing results 1 to 1 of 1

Thread: ITU-T G.825

  1. #1
    Member Reputation: 148
    Join Date
    2008-01-14
    Posts
    127


    Default ITU-T G.825

    ITU-T G.825


    The scope of this ITU-T Recommendation is to define the parameters and the relevant values that are able to control satisfactorily the amount of jitter and wander present at the SDH network-network interfaces (NNI).
    SDH network interfaces, to which this ITU-T Recommendation is applicable, are defined in terms of bit rates and frame structures in ITU-T Recommendation G.707; their electrical characteristics are described in ITU-T Recommendation G.703 and the optical characteristics in ITU-T Recommendations G.957 and G.691.
    Additional information regarding the architecture of SDH networks is found in ITU-T Recommendation G.803.
    Jitter and wander requirements for PDH and synchronization networks are specified in ITU-T Recommendation G.823, for networks based on the first level bit rate of 2048 kbit/s, and in ITU-T
    Recommendation G.824 for networks based on the first-level bit rate of 1544 kbit/s.

    The jitter and wander control philosophy is based on the need:
    –- to recommend a maximum network limit that should not be exceeded at any relevant
    interface;
    – -to recommend a consistent framework for the specification of individual digital equipment
    (i.e. jitter and wander transfer, tolerance and generation requirements);
    –- to provide sufficient information and guidelines for organizations to measure and study jitter
    and wander accumulation in any network configuration.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •