thanks , pls send password
Type: Posts; User: wael; Keyword(s):
thanks , pls send password
Thanks the BTS is BTS3900L and send mode =DTIC and receive mode=MAINDIVERSITY ,board is GRFU 4Trx and the Power level is 0 and power type is 20 watt
I did not fine the setting of the Send and...
the imbalance signal strength stats showing the problem in the TX path not RX !!!!
i dont know , this was a feedback from FM eng .
Dears
we have issue imbalance signal strength(NO VSWR alarm) even after check the feeder and jumber we didnt face any issue (No cross feeder and NO VSWR )
the cell have Single BCCH the...
Hi zhanglw
Hope you are fine , actually our vender right now is Huawei and ********
In Huawei BSC’s the TCH drop increased on ( release indication and Handover and connection failure and Error...
TCH drop incresed in most cells in all BSC .Especially the BSC's that having high traffic
Yes th DCR on the TCH not sdcch , and Ciphering was disabled im MSC side only .if I disable it from the BSS side this will solve the problem can you explain
Dear expert
I have strange issue in our network , after disable the ciphering( to reduce the call setup time ) we noticed that the DCR ( release indication , connection failure and handover )...
Usually this timer N200 come with T200 during establish the SABAM message which is in Layer 2 during the assaying the channels in the call setup(SDCCH) or during the handover(FACH/FullTCH, ...
could you pls send it to me wa2003elq@hotmail.com
thanks in advance
many thx bt i couldnt down load it
many thanks zanglw ,but i couldnt download the attached image:( , could you pls send it to my personal mail wa2003elq@hotmail.com
According to 3GPP TS45.002 the only permitted channel combination for CCCH are:
1)BCCH + CCCH + SCH +FCCH /SDCCH4
2)BCCH + CCCH + SCH +FCCH
3)BCCH + CCCH
Also we can have more than one CCCH in a...
Dears
Could you pls send me the |TDMA multi frame when the CCCH configuration =2
Thanks a lot :), . Useful Information
Boss this my personal mail if you can send me the recommendation and the parameter setting , and all the work done to resolve this issue
Wa2003elq@hotmail.com
many thanks again :)
Many thanks for your response
You know the problem back again in the weekend and the LAC spilt was not working to solve the issue
Could you please tell me what was the recommendation and...
Many thanks , pls find below the setting of the flow control
rach_load_period
8
rach_load_thresh
117
Dear expert
In ******** Power control parameters setting , I want ask about the dynamic power control
If dyn_step_adj=1 that meansè enabled (excludes power reduction)
At this case the...
Yes the below alarms existed on many cells , do you think the problem was due to the flow control, if yes can you explain?
I’m thinking if the MS was blocked due the flow control on certain cell...
sorry this is the attachment
Attached another Tool to calculate the IN building EiRP
HI
There are many way to Make NBR audit
· From the stats you can check the handover attempt =0 so that you can delete the relations that have zero attempt
· For one NBR way...
Many thanks but could you pls post the password as well . no meaning for your attaché file without password :(