No, it's not a CP mod, it's a firmware mod and the sensitive data has to be transferred correctly, otherwise the radio is deaf-muted.
I suggest you better bring your radio to someone who not...
Type: Posts; User: RA1AIE; Keyword(s):
No, it's not a CP mod, it's a firmware mod and the sensitive data has to be transferred correctly, otherwise the radio is deaf-muted.
I suggest you better bring your radio to someone who not...
Your question is too global to answer. What exactly do you want to do?
Why do you need to start a radio in engineering mode?
PM me your e-mail. I can help here :)
I had the same problem with STP8040. Check the MCP73864 chip, it's a charge controller. In my case, it was dead, so the problem was resolved by replacing the chip.
Hi,
Does anyone know, how to configure the screensaver on STP8/9000? I have imported all the images into the "Profile" template, but can't find where to assign them as a screensaver.
Thank you.
Max SRM2000 firmware - V8.3-002. SRM3500 - V10.0-008.
SRG3500 = V10.5-021
SRG3900 = V10-21 +
Ну, раз тут по-испански заговорили, давайте я по-русски буду :)
Hi!
I am looking for the connector pinout of the OTE/Selex Puma T3Ex radio (it has different connector than "normal" Puma T3 - 12 pin instead of 20 pin) to build the programming cable.
Can...
580-Gabor
It is not SRP2000 cable, it is for STP series.
2 TxD
3 RxD
22 GND
3.3V TTL logic.
But I have no idea where could you get the connector :)
If you have a backup codeplug - then just write the software, then write codeplug and you're done.
Look here: http://www.finetopix.com/showthread.php/40064-MTP700-software-erased
But, if you erased the codeplug and you do not have a saved copy of it - then you need Depot to overwrite the codeplug...
Bootloader for MTP700? :) It's not a MTP3000 :)
First of all, do NOT touch any "erase" functions. If you erase the codeplug, your radio will be bricked.
Second, just read the radio in CPS. It will ask for password, but the trick is, that CPS...
Write me a PM, I can try to help you.
You need TETRA Carrier CPS MR3.1.6. But keep in mind that there are no side cables, as well as USB cables, for MTP700. The only way to program this radio is the bottom connector usage, with proper...
He-he... I know that Azart can do it with some firmware revisions... :)
Which firmware version do you have in your MTM700? The R08 versions are for the MTM800 only. MTM700 is R02.xxx.xxx.
RicardoNit
I am not sure that the CH firmware could be reflashed via the brick accessory socket. Usually the CH is accessible via USB on the CH only.
Hi all,
Has anyone configured the non-standard duplex spacing in ******** terminals?
I have MTH800 and MTM800E. And there is the network with 7,6 MHz shift between the receive and transmit...
Thank you very much!
Hi all,
I am looking for someone who has the STP8000 series radio (8040, 8038) and the multimeter :)
I've got an STP8040 with dead internal charging circuit, and I trying to repair it. To do...
It's good, but MR3.1.6 firmware doesn't contains DMO Repeater code :)
...and you need to have Depot for MTP700 to do this trick :)