Search:

dears,

Here is some good document about the CE consumption.

I hope you like it.

BR,

but if the traffic increases, it will be only HS traffic, so i dont need to add CE since the HSDPA doesnt consume CE.

Dear Experts,

Please I need your help in this issue. if you add a second carrier, do we need to add the channel element or not ?
If yes, please explain why ??

Waiting for your feedback.

Dear Experts,

Please i need your help

What the mapping of these E// synchronization counter for Huawei:

Three counters on the Synchronization MO will be used to monitor IPdelay variation,...

Dear experts,

Some cells suffer high PS call drop. From the chrn, the RTWP is high (max -72 and mean -92).

But the problem is this RTWP is high only during the busy hour or when the traffic...

Hi Alex,

Thanks for your constant help

But i still need you help on this problem. The PS call drop is high 4% in the busy hour
When i check the KPI these two counters are the major reasons for...

Hi Keisha,

Which parameters to modify in UCELLCAC and UCELLLDR to reduce the congestion?
Waiting your feedback

Hello experts,

I need your advices again about the code cogestion

Can someone explain this concept very clear because i don't understand it very well
What causes this congestion ?
Which codes...

Thanks for your advices.
I checked the 2G data in the 3G MSC and i found that there's mismatch between the actual parameters and the configured parameters.

Thanks again for your advices

Dear Experts,

I have a problem with IRAT HO ( 3G Huawei and 2G E*******)

The failure is in the preparation phase even-though i already check the 2G and 3G configuration the MSCs and it's seems...

Dear Alex

What's the practical use of the OVSF codes in 3G Network ? can you give me exemples ?

Thanks

If i decrease the codes the user experience will be bad (the user throughput will be lower). Do you have other suggestion ?

I already check the RTWP and it's high. so you confirm my analysis?

Hello experts,

I need your help about these questions:

What's the difference between the NodeB Channel element and the cell channel element?
What's the parameter to use to determine if the...

Thanks for the help

Hello expert,

Does anyone has the KPI mapping between Ercisson, NSN and HUawei?

Pls share it

Thanks

Hello experts,

I need your advice about PS call drop.

In our network, two RNCs have a high PS call drop.
When i check the KPI it's due to RF. so i checked the PCHR and i found the cause of...

Dear experts,

I have the synchronization alarm "External Clock Reference Problem" in most of the cells in our network, how can i show the impact of this alarm in terms of counters ?

Please...

Dear Expert,

I still need your help

Dear experts,

I need your help in some problems:

First, which 3G counter can show the problem of IP Path Excessive Packet Loss Rate in the RAN12 ?
Second we have the synchronization alarm...

Dear agenov,

I checked the RTWP for the most contributors cells in the BH and i found that the max RTWP is -80 and the mean is -96.
so maybe the problem is coming from external interference. what...

Dear agenov,

I already check the RTWP and it's normal (-100 to -106). But the drop problem is for almost all the cells that's why i suspect to be RTWP.
Can you have any other approachs i can look...

Dear experts,

I need your help in PS Call Drop problem: the vendor is Huawei . The BSC version V900R012

In one RNC, The PS call drop ratio is very high 30%, when i check the causes most of it...

Dear Jayk,

This parameter is already desactivated and i did not enable it in the first place.

UL_UU_OLC: UL UU overload congestion control algorithm. When the cell is overloaded in UL, this...

Dear Zeezoo

The main congestion is comming from the UL power congestion. i already try to change the ENU (Equivalent Number of Users) to 200 but the problem persist.
There is also HS user...