SRG3900 programming and bandsplit
There seems to be a bunch of SRG3900's for sale on eBay for a quite reasonable price.
The hw model indicates UW, which could be 407-473.
Some sources indicate the following available bandsplits:
• 300 - 344MHz1
• 350 - 372MHz1 (TR)
• 368.5 - 400MHz (TL)
• 380 – 413MHz1 (TN)
• 400 - 433MHz (TG)
• 440 - 473MHz (UO)
• 806/825 paired with 851/870MHz1
Another:
• 300–344 MHz
• 350–372 MHz
• 380–430 MHz
• 440–473 MHz
• 806/825 i kombination med 851/870
MHz1
Furthermore, what software is needed to program these, and is the s/w "out there"?
Re: SRG3900 programming and bandsplit
You need "only" Sepura Radio Manager.
It is activated by Sepura for your computer.
+ one Sepura 300-00065 or 300-00971 SRM/SRG programming cable.
You can upgrade, downgrade firmware but you cant change bandsplit and there is no out of band.
An you cant enable plus features eg. repater or gateway function.
Re: SRG3900 programming and bandsplit
Quote:
Originally Posted by
580-Gabor
An you cant enable plus features eg. repater or gateway function.
Well, actually it is possible ;)
Re: SRG3900 programming and bandsplit
Yes it simple apply licence, but more complicated and expensive, than ********: simple change function enable bit from 0 to 1 and done.
And no cost for funny useless licences.
Re: SRG3900 programming and bandsplit
Quote:
Originally Posted by
580-Gabor
You need "only" Sepura Radio Manager.
It is activated by Sepura for your computer.
+ one Sepura 300-00065 or 300-00971 SRM/SRG programming cable.
You can upgrade, downgrade firmware but you cant change bandsplit and there is no out of band.
An you cant enable plus features eg. repater or gateway function.
You can edit the SQL Database of the Radiomanager, so you can edit frequencies out of band, but you can´t program it.
The bandsplit is in the firmware of the radio, not in the codeplug... :-(
Re: SRG3900 programming and bandsplit
Yes, done, unsuccesful :-(
+ you can enable enegeneer level (no extra functions, only +1 user level above abmin).
Re: SRG3900 programming and bandsplit
we are about to pull the trigger on 10-15 units, and I for myself would like confirmation that hwcode MSUUW0.... is indeed Clear 407-473MHz.
I found some "programs" "out there", is it possible to get these to work with these radios?
Must enabling of options be done with Sepura, or is there "another way" - like ********?
Re: SRG3900 programming and bandsplit
So. I bought a "couple" of these units.
Similar to https://www.ebay.com/itm/Sepura-SRG3...y/372229462230 (same markings etc).
The display is from a 3500. If a serial port is present on the display, is it possible to program it from there?
On the Simoco/Sepura SRM1000, it's possible. If not, the other possibility is the HD15-connector. Are the serial levels TTL or conventional serial?
Will a usb-rs232 work nicely?
I have no clue of radio version. Does someone have a listing what radiomanager goes with which radio version?
A listing would reveal the earliest SRG3900 software to be V9.0-007.
While looking at an ad for a SCC3, it appears it would need SC1.6 SW-Version? what's this?
Does the radio manager 1.8 support this radio? if so, can it be downloaded and ran without a hw-license?
Re: SRG3900 programming and bandsplit
First:
read the SRM/SRG programming manual, then the Sepura Radio Manager user guide.
1. you can read/write the terminal through the radio body (socket for 3x5 pins), if it is on the controlhead, then yes.
2. you dont need any level converter.
3. usb-rs232 is OK
4. v9.0-007 is not the latest, you can use RM1.X version.
5. you need for all the RM's HW-license, without them, you can't complete the setup and use them (same for Nokia-EADS-Cassidian-Airbus softwares).
You don't have colur console (display), SC1.6 is the SW version for that - you don't need it.
Re: SRG3900 programming and bandsplit
There seems to have been a tool available for some people to create HW-licenses for RM1.8, but the links have gone cold since.
Is this still out there?
Re: SRG3900 programming and bandsplit
No, but I can generate it for you - no problem.
Re: SRG3900 programming and bandsplit
That was disappointing. The seller canceled after payment. Oh well. Money saved on the other hand
Re: SRG3900 programming and bandsplit
The following can be split into another thread.
I bought one SRG3500 and a SRM3500. These seem to be the same radio, is there any difference?
They've been posted and I should have them in a week.
I've found RM1.81.0.37 AND KeyGen.exe (Sepura registrator) - but I can not get it to work :-( it does not accept the created license. (Win7 32bit)
Any help on these?
Re: SRG3900 programming and bandsplit
SRG and SRM are not te shame.
SRG: repeater capable mobile radio.
RM1.XXX: use windows XP.
Re: SRG3900 programming and bandsplit
Windows XP? mein gott. This will be interesting..
Are there any other differences between SRG and SRM? supported software/firmware?
Re: SRG3900 programming and bandsplit
Still no luck with the keygen, not even in windows XP. Could someone help me if I send the hardware id?
Re: SRG3900 programming and bandsplit
Keygen only working for EL standalone version.
Re: SRG3900 programming and bandsplit
Hi!
RM1 runs on Win7 64Bit without any problems.
Between a SRG and SRM firmware no diffrences. Max 10.0
SRG= Can work as arepeater and/or a Gateway
SRM: only TMO/DMO.
Re: SRG3900 programming and bandsplit
Quote:
Originally Posted by
bytehunter73
Hi!
RM1 runs on Win7 64Bit without any problems.
Between a SRG and SRM firmware no diffrences. Max 10.0
SRG= Can work as arepeater and/or a Gateway
SRM: only TMO/DMO.
Max SRM2000 firmware - V8.3-002. SRM3500 - V10.0-008.
SRG3500 = V10.5-021
SRG3900 = V10-21 +
Re: SRG3900 programming and bandsplit
Max SRM2000 firmware: V8.3-005 (163901902933).
Re: SRG3900 programming and bandsplit
What's the biggest difference between SRG3900 and SRG3500? available bandsplits, naturally (3900 offers UW-band and thus access to amateur, where as the 3500-series does not). Yes, there is TG, but someone sold a slice of our 70cm band years ago, so it starts at 434, not 432.
Also, if a radio has been programmed with RM2 and upgraded to the latest FW, can it be downgraded to a FW compatible with RM1.8 and then use RM1.8?
Furthermore, what's the latest FW that RM1.8 supports?