Pctel MX power connector

A friend gave me a Pctel MX scanner to play around,
but somewhere he lost the power cable in some of DT car.
(No, the device is not stolen)))

Friend soldered me a bypass cable and gave me a power supply,
but maybe it works when the power is 230, not my 160V.
im my case - device don't boot with two RF. only with one.

Please tell me the marking of the power connector.
I want mage good copper cable to throw on the 150Ah battery.

I also solder my wire, but The device consumes 70+ watts
and wire that I soldered - very hot, and Voltage without RF board <10 Volt.

so, please, tell me model of power connector at pctel MX?

Thanks.
Attachment 41779

found. it's lemo 2b 303 series

it is no need to use MX scanner, power consumption is quite high, just use DRT4311B is OK, only 10 Watts, search it within Ebay

thank.

yea, the receiver consumes a lot.
the thin wires were warming up at me,
and the receiver was working unstably.

Now I monitor the power.

Attachment 41786