Hi friends,
Pls help me how can I use sony erisson T610 for drive test on TEMS 8.0.3
I try connect T610 to TEMS 8.0.3 but alway got connect failed. Could some expert help me on that.
Thank you very much for your help.
Printable View
Hi friends,
Pls help me how can I use sony erisson T610 for drive test on TEMS 8.0.3
I try connect T610 to TEMS 8.0.3 but alway got connect failed. Could some expert help me on that.
Thank you very much for your help.
Your license support that phone??? That Tems Version support that phone???
You can see that information in the help menu: Connectable Devices
Hi redernesto,
Thank you very much for your reply.
TEMS 8.0.3 can support T610 phone. Base on help document, TEMS 8.0.3 can support the GSM phone below:
• Sony E******* S710a
• Sony E******* T610
• Sony E******* T616
• Sony E******* T618
• Sony E******* W600i (GSM only)
• Nokia 6230 EU
I did not have exprience with TEMS but I am thinking the problem can come from T610 cable. Do anyone tell me the T610 cable can use for drive test.
Thanks
My opinion is that as you guessed there is cable driver requiring,
I think you need to instal rs232 driver,
Regards
After switching cable to computer, also check\verify your cable's current port number from windows device manager. So when you are defining T610 on TEMS, you should select correct port number for MS.
Hi
First think to do is: check your TEMS Investigation Software License... it will only allow you to connect any connectable devices if you have a correct license. Do with HASP License Reader in Utilities tab to know this...
Further, make sure that you have TEMS Activated license on your T610i. Mobile Action MA-8910P cable will do perfectly to connect the T610i or T68i to your computer and do measurement using your software...
Have a good luck
Regards
parto_tegal
Hi Parto_tegal and zaebolll,
Thanks for your take time on my issue.
I have checked com port and assign correct com port to TEMS but it is till connect failed.
I also checked my data cable and it is not MA-9810P cable type that Parto recomment. I will try to get correct cable and testing again.
Thank you very much for all of you.
Is your cable a TEMS cable (or tested before with a working tems equiptment) or just a normal data cable? If it is a normal data cable it wont work , tems uses two Rx and Tx , one for voice data and the other one for packet data. you can modify a normal data cable to work with tems, but it will only work for voice calls testing. The T610 works perfectly with that version of data collection but pocket/tems license must be active in the phone or it will not connect.