-
1 Attachment(s)
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
esam612
Really thanks kjms for your effort, but after i put the serial and site key and after the made its update and passes the registration i found another problem as follow:-
Each time i open any exam i find this message " sorry,there was a problem generating the test.your data files could be corrupted"
I have v8006
So, kindly help....should i remove it and install v8002 or there is another solution???
Ok people, I found a way to actualize the database to the latest but you have to start from version 8.0.0.2 again or a non corrupted 8.0.0.6 version. First install version 8.0.0.2 disconnected from the Internet then update to v8.0.0.6. After verify that you are up and running, go to the installation directory and backup file app_config.xml. Connect to the Internet and let the program update the database. Disconnect the Internet again, go to the installation directory and rename the app_config.xml, copy your app_config.xml backup file to the installation directory and you would be running up to the latest database. If you go to the Help-> About… screen the system will show "Last question database update on: 9/21/2012" but you where running version 9/21/2013... Go and study hard...
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
Cancuerno
Ok people, I found a way to actualize the database to the latest but you have to start from version 8.0.0.2 again or a non corrupted 8.0.0.6 version. First install version 8.0.0.2 disconnected from the Internet then update to v8.0.0.6. After verify that you are up and running, go to the installation directory and backup file app_config.xml. Connect to the Internet and let the program update the database. Disconnect the Internet again, go to the installation directory and rename the app_config.xml, copy your app_config.xml backup file to the installation directory and you would be running up to the latest database. If you go to the Help-> About… screen the system will show "Last question database update on: 9/21/2012" but you where running version 9/21/2013... If you can live with that forget about it and study hard... If you want that your screen shows "Last question database update on: 9/21/2013" edit your app_config.xml file and change 1348256690 with 1379815257. That’s will show "Last question database update on: 9/21/2013" when you go to the Help-> About… Now you can go go and study hard…
It worked to the point of exchanging 1348256690 to 1379815257.
When changed, the database was corrupted when I return to the same date, the bank works correctly. but ... must be disconnected from the internet.
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Dear kjms
my site code is B7D2 4818 AA55 DB11 36 so i need the serial and site key please
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Dear Cancuerno, i can`t download the photo attached as i can`t download the keygen software
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
esam612
Dear kjms
my site code is B7D2 4818 AA55 DB11 36 so i need the serial and site key please
serial no : 0134 1A0A 0080 FF6D 8147 F8
sitekey : 435E 91B0 A2AA C143 F6CD C4BA 7D
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Dear Cancuerno How could i update to v8006 while i disconnected the internet? did you mean that i should install v8006 over v8002(after entering the site key) or install v8002 and after i connect the internet to update it to v8006??
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Thanks brhow for your efforts
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Sorry brhow, but i faced a problem while trying update the database, so i need the site key for the next side code please because i decide to stay with the v8002 with old database till 9-12 .
8F98 8C0A DC1B 84D9 CE
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
@esam612
serial no : 0170 170A 0080 FF6D 819E FB
sitekey : 01F9 907E 8578 0E9F A970 0250 38
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Dear ALL,
I need the serial and site key for side code 8F98 8C0A DC1B 84D9 CE
Thanks
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Thanks kjms for your efforts again
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
thanks guys, good program for practice
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi, for site code 2943 1DF6 73D7 C11E 28 what license sould i use?
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kostsour
Hi, for site code 2943 1DF6 73D7 C11E 28 what license sould i use?
serial no : 0136 650A 0080 FF6D 8148 E6
sitekey : 947E 0D9A 40A6 50AD F228 7441 1A
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
i am sorry, how do i change the site code?
thanks for tha answer again :)
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kostsour
i am sorry, how do i change the site code?
thanks for tha answer again :)
each time you install the software again, it generates a new code site!
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
brhow
each time you install the software again, it generates a new code site!
ok, but how i will insert the serial if the site code is different?!
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kjms
serial no : 0136 650A 0080 FF6D 8148 E6
sitekey : 947E 0D9A 40A6 50AD F228 7441 1A
I found the solution. ! it worked and Update was done.
when i start a test it says: database corrupted.
I have version 8.0.0.6. Do I need to downgrade?
Where can i find the 8.0.0.2. version?
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
I tried in another pc version 8.0.0.2.
new site code
DEE9 F779 8F1F 238B DF
do i need to do something more?
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kostsour
I tried in another pc version 8.0.0.2.
new site code
DEE9 F779 8F1F 238B DF
do i need to do something more?
serial no : 0144 010A 0080 FF6D 81EB DD
sitekey : F353 98F8 C45E 6BF9 929C B574 87
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kjms
serial no : 0144 010A 0080 FF6D 81EB DD
sitekey : F353 98F8 C45E 6BF9 929C B574 87
I still receive the same message when i start the test.
That the database files have been corrupted.
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
@kostsour read the first post.
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kjms
@kostsour read the first post.
thanks kjms
I cannot find the files to delete. There are only:
RMCPROJ.CIHS
RMCPROJ.ckn
RMCPROJ.LIC
i entered the keys but i cannot start a test. update is done correctly
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
enable the hidden folder, you will see this files
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kjms
enable the hidden folder, you will see this files
No hidden folder or subfolder.
win 7 64bit
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kostsour
No hidden folder or subfolder.
win 7 64bit
kostsour,
By default "PM FASTrack PMP v8" is configured to run in compatibility mode as a "Win XP SP 3" app. yow have to remove the compatibility mode & run as Aministrator.
Or disable completely the Program Compatibility Assistant for Windows 7 (services.msc->Compatibility Assistant service->Right Click->Stop).
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
esam612
Dear
Cancuerno How could i update to v8006 while i disconnected the internet? did you mean that i should install v8006 over v8002(after entering the site key) or install v8002 and after i connect the internet to update it to v8006??
Dear esam612, download both versions .2 & .6. Install v.2 then update to v.6. Go to the "PM FASTrack PMP v8" installation dir & copy app_config.xml to a safe place. Let the app update the database then disconnect the Internet & copy back the app_config.xml file to the "PM FASTrack PMP v8" installation dir & run the app. You would be running v.6 with an updated db. If you forget for some reason to turn off the Internet to run the prog, just disconnect the Internet and copy back the app_config.xml file to the "PM FASTrack PMP v8" installation dir.
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
Cancuerno
Dear esam612, download both versions .2 & .6. Install v.2 then update to v.6. Go to the "PM FASTrack PMP v8" installation dir & copy app_config.xml to a safe place. Let the app update the database then disconnect the Internet & copy back the app_config.xml file to the "PM FASTrack PMP v8" installation dir & run the app. You would be running v.6 with an updated db. If you forget for some reason to turn off the Internet to run the prog, just disconnect the Internet and copy back the app_config.xml file to the "PM FASTrack PMP v8" installation dir.
Quote:
Originally Posted by
Cancuerno
kostsour,
By default "PM FASTrack PMP v8" is configured to run in compatibility mode as a "Win XP SP 3" app. yow have to remove the compatibility mode & run as Aministrator.
Or disable completely the Program Compatibility Assistant for Windows 7 (services.msc->Compatibility Assistant service->Right Click->Stop).
Thanks Cancuerno, I' ll uninstall and try again.
New site code: E674 4E75 F47B B1A5 E7
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kostsour
Thanks Cancuerno, I' ll uninstall and try again.
New site code: E674 4E75 F47B B1A5 E7
Serial no : 0141 170A 0080 FF6D 815C 23
Sitekey : 95DB AF8A EC60 535A 2D08 6B5B B6
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
This is how it worked to me:
1)You disable internet connection
2)You install version 8.0.0.2
3)You install version 8.0.0.6
4)You run program (internet connection is still disabled)
5)You choose activate and insert the word MANUAL in Serial Number
6)You get a site code and you post it here or you use the ckInfo+ as described in the first post
7)You backup file app_config.xml from installation folder
8)You enable internet connection
9)You update the database and BEFORE the program restarts (LAUNCH button) you disable the internet connection
10)In the destination folder you rename app_config.xml (for example as app_config2.xml)
11)You copy in the destination folder the backed up app_config.xml (step 7)
12)You change the compatibility mode to windows 7 and the program should run as administrator (right click in .exe file and then properties)
13)You run the program and everything is ok (you have to be offline)
For people who have downloaded ckInfo+, you create a txt file and you save it as fast.ckInfo .The script you need in the file is:
#Default Script (ckInfo)
ScriptName=PM Fastrack PMP 8.0.0.2
Action=CreateSiteKey
//SiteCode=
UserKey=D200 E78F 9D2A 7040 1E
AddToExistingLicence=no
NumberOfLicences=1
NetworkLicence=no
EasyLicence=no
LicenceDuration=days
NumberOfDays=365
KeyLevel=10
KeyOptions=0-9
=========================================
Things I didn't manage to do:
1) Change the database update date written in Help->About menu. When I follow the instructions Cancuerno wrote my database corrupts and I have to restore app_config.xml.
When I try it, the date I can see is 9/22/2013 and not 9/21/2013.
2) I cannot firewall PM FASTrack from windows firewall because when the program runs, it creates subprocesses called CKS***.tmp (different every time) which try to update the database.
If anyone finds a solution to these please post. I also don't know what happens with future updates.
I hope you found that usefull :)
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Thanks to kostour and Cancuerno. It worked great. V 8.0.0.6
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi, can you please give me reputation? Please. Thanks
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi, I need it too. can you give me reputation? please. Thanjs
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi brhow, my site code is F2DB 94BC 6767 A45A 33
can you please help as i need serial and site key. Thanks, please..
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
stcheah
Hi brhow, my site code is F2DB 94BC 6767 A45A 33
can you please help as i need serial and site key. Thanks, please..
Serial: 01D1 0F0A 0080 FF6D 81CD 4E
Sitekey: 1725 C2D0 1572 F486 AA1C 7079 04
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
kjms
Serial: 01D1 0F0A 0080 FF6D 81CD 4E
Sitekey: 1725 C2D0 1572 F486 AA1C 7079 04
kjms, why do you always informs the serial? It should be entered where?
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Quote:
Originally Posted by
brhow
kjms, why do you always informs the serial? It should be entered where?
Hi,
Read my post in the previous page and the first post of the topic. Generally you need to search all the posts and it gets some complicated.
I hope my post will help.
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi! Please help me! My exam its in 2 weeks!, my site code its: 8780 3836 C150 86DD 06 Best Regards!
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Serial: 016A 2C0A 0080 FF6D 8195 4B
Sitekey: 0B85 ED1B 895E A622 1C2D 89D7 FC
-
Re: PM FASTrack® for the PMP® Exam – Support v8.0.0.2
Hi Kjms.. Can you help me as well ? I have enrolled for exam of 10th Oct 2013
I tried to look for ckInfo+.exe but not able to find any effective information / download link, its directing to many other websites.
My site code : 837A CFEB 5CB3 34F2 42
Can you please help me with serial number?