i wanna share with you a good feature to Imorpve the MOS ,thanks

4.jpg

Instead of selecting only the most optimal path, the PLVA selects the top N (N is 4 in this document) optimal paths and performs CRC on the data decoded on these paths. The PLVA only exports data that passes the CRC. If the data decoded on these paths fails the CRC, the PLVA exports the data decoded on the most optimal path, which is the same path selected by the Viterbi algorithm. The PLVA outperforms the Viterbi algorithm because it chooses the data decoded on multiple paths, which include the optimal one selected by the Viterbi algorithm. Therefore, when the data decoded by the Viterbi algorithm is correct, the data decoded by the PLVA is also correct. However, when the data decoded by the PLVA is correct, the data decoded by the Viterbi algorithm is not necessarily correct because there are occasions when the data decoded on the optimal path is incorrect whereas the data decoded on other paths selected by the PLVA is correct. In simulations where the PLVA selects four paths, the signal-to-noise ratio (SNR) is 0.2 to 0.8 dB greater than that produced by the Viterbi algorithm.

below the result fter activation

2.JPG

1.JPG

i want to share with you a good feature to improve Call Setup time

below the result after the activation call delay decreased by 200ms

fast rb.jpg

Th feature procedure

Capture.jpg