PDA

View Full Version : Multikey latest release version 0.18.2.4



Shiela
2010-04-22, 04:00 AM
Multikey 0.18.2.4 32bit


http://rapidshare.com/files/378092769/mk18.2.4.rar
pass:ru-board

Multikey 0.18.2.4 64bit thanks to kiki


http://rapidshare.com/files/37895396...4_x64_WIN7.rar
pass:ru-board

Any problem with this tools, email the author at mail2elite@yahoo.com
Enjoice guys! :D:D

gokilaravee
2010-04-22, 01:02 PM
Is any 64 bit solution in MK later versions?

Shiela
2010-04-22, 02:46 PM
*deleted* :D:D:D

freakturd06
2010-04-22, 02:50 PM
-----------------------------------

Shiela
2010-04-22, 03:23 PM
@freakturd06

For cooking dear. :D
OT: If you want to run your software without dongle, this is the tool.
About the tutorial, lurk moar on the internet. :)

kentck86
2010-04-22, 03:38 PM
corrupted .rar file..can you please reupload?

Shiela
2010-04-22, 04:11 PM
@kentck86

Corrupted? Meh..I've downloaded it and it's fine for me.
Download it again, maybe your internet connectio problem.

bassem_16
2010-04-22, 06:35 PM
it is not corrupted, it just has a password :)

Shiela
2010-04-22, 07:07 PM
@bassem_16
Ha, you're right dear. :)

kiki
2010-04-23, 02:56 PM
Multikey 18.2.4 x64 Win7.


http://rapidshare.com/files/378953968/MK_18.2.4_x64_WIN7.rar
pass: ru-board

gokilaravee
2010-04-23, 08:29 PM
thanks for sharing 64 bit version of multikey in later series.

Is reg format same as 32 bit?

DCA
2010-04-24, 04:10 AM
I think you need a license first for the 64bits version.

As most of us know, multikey is going commercial ...

Shiela
2010-04-24, 04:32 AM
Dunno about that bro.
Maybe you can contact elite.r to confirm about this?

DCA
2010-04-24, 04:53 AM
@Sheila

Updated version: 18.2.4

**************************************************
Starting from build 0.18.2.4 an opportunity to order an emulator with additional options:

- Build the emulator for 64-bit operating systems;
- Emulation keys Dinkey;
- Tabular emulation Guardant;
- License (temporary restrictions on use, bind to the iron) emulator.

mail2elite@yahoo.com

**************************************************

History

+ Added
- Fixed
! Changed

0.18.2.4 (20.04.2010)
- Fixed Funk HL_CALC hardloka
+! Changed the option Option [0] - now sets the time delay,
Option [0] = 00 - without delay, Option [0] = 01 .. 7F - increase delays.

beniy
2010-04-24, 05:43 AM
Multikey 0.18.2.4 32bit



Multikey 0.18.2.4 64bit thanks to kiki



Any problem with this tools, email the author at mail2elite@yahoo.com
Enjoice guys! :D:D
Hi Shiela,
IS that work for XCAP and the other programs which need licens?

Shiela
2010-04-24, 11:03 AM
@DCA
Thanks for the translation. My PC cant display a Russian language character at all.
It only display "a worm". That's weird.
Regarding this topic, maybe this emulator for 64bit, is for demo only?
Just assuming, need someone to test it anyway.

@beniy
It's all depend on you now.
Lurk moar!

markmorrick
2010-04-24, 04:12 PM
Here you are "readme.txt" contents :

To install and use MultiKey 18.2.4 x64

Functionality of this build a fully conform to the functional assembly under a 32-bit systems.
Format reg files the same.

Difference: assembling the 64-bit uses a licensing system and will only work with a valid license.


1. Set the reg file in the system.
2. Start install.cmd, while the emulated key installed on a system with an error.
3. Start GetAnswer.cmd, in a folder with the file will appear Answer.txt with branch
Registry emulator where you want the option "Answer".
4. Send the file Answer.txt (or option "Answer") and get a license key.
5. Add a license in your reg file and repeat steps 1 and 2 with the new reg-file, the emulator has fully earned.
(On the computer where the initial installation was carried out "as binding to the iron is required)


To verify that you can order a trial version of the emulator with a limited validity.
for trial to send the parameter "Answer" is mandatory.

Shiela
2010-04-24, 04:49 PM
@markmorrick

That's why the author VMprotect his product. :D

beniy
2010-04-25, 04:31 PM
@DCA
Thanks for the translation. My PC cant display a Russian language character at all.
It only display "a worm". That's weird.
Regarding this topic, maybe this emulator for 64bit, is for demo only?
Just assuming, need someone to test it anyway.

@beniy
It's all depend on you now.
Lurk moar!

What did you mean? "It's all depend on you now"

Shiela
2010-04-25, 04:54 PM
@beniy

Inside the Multikey folder, there are tools for specific dongle, etc. HASP, SSPro.
This tools are for dumping the dongle data. Identify what type dongle you have.
Dump your dongle with those tools and convert it to reg file.
Install Multikey and then the reg file.
If you're doing it right, your S/W will run without dongle. :)
These guide is scattered all over the net, what you have to do is only to search it. :D

freakturd06
2010-04-26, 02:43 PM
--------------------------------

Elite_r
2010-04-27, 05:07 AM
If somebody finds out errors in work multikey write to me in PM

Elite_r
2010-04-27, 05:20 AM
I will tell all that now did not ask questions for nothing, I will leave for 2 weeks, I will answer then as I will arrive

smartem
2010-05-06, 10:34 PM
Multikey 0.18.2.4 32bit



Multikey 0.18.2.4 64bit thanks to kiki



Any problem with this tools, email the author at mail2elite@yahoo.com
Enjoice guys! :D:D


there is virus in this files, my antivirus deleted it. can you check Shiela and confirm this? I use kaspersky and gdata

gokilaravee
2010-05-06, 10:46 PM
this is vmprotected,u can trust .

fotondiamond
2010-05-07, 07:33 AM
this is vmprotected,u can trust .

Oh, excellent packer.

BR//
Foton

00dta
2010-05-08, 08:53 AM
Great Thanks!!!

chokri
2010-05-22, 12:23 AM
thank you shiela

shankarprasai
2010-05-22, 01:32 AM
Dear all
i had installed multikey 0.18.2.4 and in devicemanager ,i saw the virtual drive aladin hasp hl key and usb key . i installed tems3.0.1 but it did not work . i have no knowledge about it . i request all to help me about it .

bassem_16
2010-05-22, 03:26 AM
the tems is using hasp HL usb key ?
Do you have the original USB and you want to emulate it ?

cooltyger
2010-05-22, 05:33 AM
Hi,

Any pointers on how to make a reg file for mk when the dongle/dump is not available!!!!! :L

BRs
CT

Shiela
2010-05-22, 06:21 AM
Yes, get acces to the dongle and dump it.

leosedf
2010-06-07, 05:37 PM
Hello!
Do i have to have sentinel drivers installed?
I am cleaning my system now from other drivers. I am clicking on the reg file and then run install.cmd but the soft still doesn't work (atoll).

Any clues?

bassem_16
2010-06-07, 08:19 PM
yes you must have it installed

leosedf
2010-06-07, 08:24 PM
Hmmm.. Never mind. It works now, strange.

Thank's:)

mybstyle17
2010-06-23, 02:31 PM
Hi for all
I have a question , How rename the reg file destination
Example: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\xxxxxx] to
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\KeyMulti\Dumps\xxxxxx]
I searching and rename into " MultiKey.sys " and the reg file ,but don't work .
Apear this>>
http://i50.tinypic.com/351sswi.jpg

mybstyle17
2010-06-23, 03:56 PM
Anybody a suggestion?

bassem_16
2010-06-23, 04:53 PM
you have to rename all files corretly like the new name, check again
or try to uninstall the drivers from device managers and from drivers folder in system32 and try again

mybstyle17
2010-06-23, 05:01 PM
I rename into MultiKey.sys file destination and reg file

mybstyle17
2010-06-24, 01:32 PM
I remove the emulator and delete all manually ,reinstal the new emulator ,but nothing,don't work...
Anybody know how modify this?

yogi_saw
2010-06-24, 02:31 PM
Just to clear things
1 do u have soft running in win7 before using modded mk? With same mk version
2 why do u need modded mk if ur soft was working fine
3 have u tried mk given by me it was 18.0.3 with new reg path

mybstyle17
2010-06-24, 02:38 PM
So
I use MK 18.0.3 for previous version software , working fine...
Now for new version don't work,because into the new version have a error for this.

bassem_16
2010-06-24, 03:50 PM
if you use the new version, then you must change 2 hex entries first in the cell type field

basicaly 0x5 and 0x7 from 03 to 01

mybstyle17
2010-06-24, 03:56 PM
The error is for location

SYSTEM\CurrentControlSet\MultiKey\Dumps\....
and more
System\CurrentControlSet\Services\Emulator\Sentinel\
System\CurrentControlSet\Services\XRNBO
Software\Toro\Sentinel\SuperPro\Dumps

bassem_16
2010-06-24, 03:59 PM
more than one emu running, did you try removing one of them and try again ?

mybstyle17
2010-06-24, 04:13 PM
the emulator running ,but when I open the software apear the error message

bassem_16
2010-06-24, 04:38 PM
it seems the software detects emu, try to rename all files for mkey

example rename multikey.sys to mybstyle17.sys :)

I mean rename all multikey in all files to another name, you also need to rename the commands inside the .bat files as well (install.bat ..etc)

mybstyle17
2010-06-24, 04:42 PM
I tryed ,I rename all multikey name to keymulti and don't work

bassem_16
2010-06-24, 05:41 PM
which software you are trying to emu ?

mybstyle17
2010-06-24, 05:48 PM
The software is Accu Mark..

bassem_16
2010-06-24, 06:31 PM
I believe Gokilaravee can help you better, he is more experienced with this software and tried it before

mybstyle17
2010-06-24, 06:37 PM
He is very busy now........

gokilaravee
2010-06-24, 06:56 PM
accumark is working fine with multikey emulator.
post error msg/screen shot here..

mybstyle17
2010-06-24, 06:59 PM
The error is " unexpected overflow "and is Accu 8.4

gokilaravee
2010-06-24, 07:04 PM
need full version name 8.4.0.69 or 8.4.0.93

mybstyle17
2010-06-24, 07:07 PM
accu 8.4.0.93

gokilaravee
2010-06-24, 07:43 PM
install ur software with vusb emulator..then dump ur emulator with PVA and use multikey...

mybstyle17
2010-06-24, 07:54 PM
when I dumped and apear pva error "don't calculate conection line",but create the dmp file

gokilaravee
2010-06-24, 08:13 PM
post dump here or convert into reg for multikey.check and let us know result.

yogi_saw
2010-06-24, 08:19 PM
probably soft works for 5 minutes and after it shows the error isn't it

mybstyle17
2010-06-24, 08:27 PM
probably soft works for 5 minutes and after it shows the error isn't it
No, don't open

mybstyle17
2010-06-24, 08:32 PM
I generate the reg file with dmp2mkey for Multikey 18.0.3

gokilaravee
2010-06-24, 09:41 PM
remove all emulators from ur system and install again

mybstyle17
2010-06-24, 09:49 PM
I tried ...
I remove all manually after remove...and don't work
I checked after install in system32..apear into file the location by me,but don't work
Test please anybody with a emulator

madsland
2010-06-25, 12:17 AM
remove all old emulator entries

C:\Windows\System32\DriverStore\FileRepository

yogi_saw
2010-06-25, 03:00 AM
R u sure u have solved all algos i cant see wp in ur reg
(i guess reg is not infront of me now pls chk and post dmp2mkey result)

mybstyle17
2010-06-25, 06:03 AM
I dump with PVA ,I regenerate the reg file with new dmp2mkey ,I corected the CellType 01,01,03,03,03,03,03,03 to 01,01,03,03,03,01,03,01
and I use now MK18.2.4 .

mybstyle17
2010-06-25, 06:07 AM
I don't understand how ,but working fine and quick.
But is very interesting why don't work when I rename the location ?
I'll try rename into mk18.2.4 (for experiment)
Thanks for all for help and suggestions

gokilaravee
2010-06-25, 12:01 PM
finally u got success.

mybstyle17
2010-06-25, 01:23 PM
Yes work fine,but why don't work when I rename the location ?

bassem_16
2010-06-25, 11:24 PM
What do you mean by dont work when you rename the location ?
which location you are talking about ?

yogi_saw
2010-06-26, 04:22 PM
@mybstyle17 disable ur antivirus and then install modded mk it should work

mybstyle17
2010-06-27, 04:04 AM
What do you mean by dont work when you rename the location ?
which location you are talking about ?
I rename the regedit location
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\KeyMulti

mybstyle17
2010-06-27, 04:06 AM
@mybstyle17 disable ur antivirus and then install modded mk it should work
I use Kaspersky and I don't have problem with this when I install MK

yogi_saw
2010-06-27, 01:31 PM
Did u give a try as i said
do u get message for succesfull installtion of drivers for mk?

mybstyle17
2010-06-28, 03:54 PM
I tryed again rename the reg file location for mk 18.2.4...
1. I remove the mk ,I delete manually the file in windows>system32>drivers...restart pc....
2. I install the modified mk 18.2.4 but, I don't get the message for succesfull installation of drivers.
3. I open with winhex the MultiKey.sys into system32 and I rename the regfile destination here...
4. I restart my PC and I have the message for Succesfull installation the driver and work fine with modified location for reg file.
I don't understand why don't install the modified MK?
When I open the Multikey.sys into system32 I apear with original location and name,WHY???

mybstyle17
2010-06-28, 04:20 PM
I don't remove all old emulator entries in
C:\Windows\System32\DriverStore\FileRepository
How remove ?
I don't know (don't alow)

madsland
2010-06-28, 04:25 PM
I don't understand why don't install the modified MK?

I already say to remove all old emulator entries in C:\Windows\System32\DriverStore\FileRepository


C:\Windows\System32\DriverStore\FileRepository
How remove ?

you have to modify the owner and the permissions

property/security

mybstyle17
2010-06-28, 04:32 PM
I tried........

madsland
2010-06-28, 04:39 PM
and .... ?

mybstyle17
2010-06-28, 04:42 PM
I don't understand why don't install the modified MK?


Read all posts.

yogi_saw
2010-06-28, 05:11 PM
I tryed again rename the reg file location for mk 18.2.4...
1. I remove the mk ,I delete manually the file in windows>system32>drivers...restart pc....
good...


2. I install the modified mk 18.2.4 but, I don't get the message for succesfull installation of drivers.
wait don't install yet...


3. I open with winhex the MultiKey.sys into system32 and I rename the regfile destination here...
open multikey.sys from mk's installation (make sure u backup the same before) correct the checksum by peditor and then install mk after disabling ur antivirus
chk if devcon is successful or failed

madsland
2010-06-28, 05:42 PM
I already read all posts

for Win7 :

1. remove the mk , delete manually the file in
windows>system32>drivers

2. delete manually all old emulator entries in
Windows\System32\DriverStore\FileRepository

3. edit multikey.sys, change the location and correct the checksum by peditor

4. restart pc, install the mkey modified and enjoy !!!

yogi_saw
2010-06-28, 06:09 PM
but why don't u work on installation instead of installed copy of mk
mk is already in memory if coded it can will write its memory to multikey.sys on the hdd and rewrite the whole mk

try changing path in installation folder not in system32

madsland
2010-06-28, 06:50 PM
Yes i agree with yogi_saw

mybstyle17
2010-06-28, 09:31 PM
OK, THANKS FOR ALL

yogi_saw
2010-06-28, 09:52 PM
no mention friend just reply if it works 4 u

mybstyle17
2010-06-29, 05:16 PM
Deleted mannually all old emulator entries in
Windows\System32\DriverStore\FileRepository and work fine.
Thanks for all.

madsland
2010-07-01, 03:40 PM
Yes but i think it's just for Win7 not for Xp.

mybstyle17
2010-07-01, 03:51 PM
I don't test,but working on xp.(99%)

madsland
2010-07-01, 06:37 PM
I said "delete manually all old emulator entries in Windows\System32\DriverStore\FileRepository" is just for Win7 not for Xp

mybstyle17
2010-07-01, 07:18 PM
Is for all (Win7 ,Wista,xp),when you have install an old MK version !

mybstyle17
2010-07-01, 07:39 PM
I modify MK 8.2.4 and I attach