MiniLink Craft 2.5 [Archive] - Wire Free Alliance

Cost_Reducer

2010-04-01, 04:07 AM

Hi everybody,

here is a link to download latest ML-Craft 2.5. It`s used for Baseline 4.3. The Software Baseline 4.3 will coming in the next few days :D

Enjoy it!

http://www.4shared.com/file/252624828/34690bf9/LCT25.html

Please add reputation and press the THANKS-button :p

marceloenrique

2010-04-01, 01:33 PM

Hi everybody,

here is a link to download latest ML-Craft 2.5. It`s used for Baseline 4.3. The Software Baseline 4.3 will coming in the next few days :D

Enjoy it!

http://www.4shared.com/file/252624828/34690bf9/LCT25.html

Please add reputation and press the THANKS-button :p

Hello friend

You are a great man
thank you very much

just need 1 reputation and will be a senior member
Regards

marceloenrique

2010-04-01, 10:18 PM

Hi everybody,

here is a link to download latest ML-Craft 2.5. It`s used for Baseline 4.3. The Software Baseline 4.3 will coming in the next few days :D

Enjoy it!

http://www.4shared.com/file/252624828/34690bf9/LCT25.html

Please add reputation and press the THANKS-button :p

WELCOME

Señior Member

jejejej

ofca

2010-04-02, 05:27 AM

Thanks! Enough said. :)

Now please don't keep us waiting with new SBL :D

bassem_16

2010-04-03, 09:15 PM

Thanks a lot, Great Post :)

ofca

2010-04-07, 08:33 PM

Any news, cost_reducer? :)

bassem_16

2010-04-08, 09:47 PM

Hello,

Anyone has a complete version for CT , all I have is an upgrade to 2.4 or an upgrade for 2.5

can anyone please post a complete version which i can do these updates?
Thanks a lot

Cost_Reducer

2010-04-09, 03:01 AM

Hi mate ,

Hello,

Anyone has a complete version for CT , all I have is an upgrade to 2.4 or an upgrade for 2.5

can anyone please post a complete version which i can do these updates?
Thanks a lot

ask me :p:p:p

Ich have a complete version of LCT. I try it to post here in next hours.:time:

Cost_Reducer

2010-04-09, 03:03 AM

Any news, cost_reducer? :)

Yes i have good news for all E******* fanatic guys here....

I got baseline 4.3 in this week and i will share it here with you guys:D

zeuscane

2010-04-09, 03:05 AM

Good news today.

zeuscane

Yes i have good news for all E******* fanatic guys here....

I got baseline 4.3 in this week and i will share it here with you guys:D

ivan.makajic

2010-04-09, 06:27 PM

Hi everybody,

here is a link to download latest ML-Craft 2.5. It`s used for Baseline 4.3. The Software Baseline 4.3 will coming in the next few days :D

Enjoy it!

http://www.4shared.com/file/252624828/34690bf9/LCT25.html

Please add reputation and press the THANKS-button :p

Thanks a lot

Cost_Reducer

2010-04-09, 07:44 PM

Thanks a lot

but don`t forget to add reputation :p

ofca

2010-04-10, 06:54 PM

http://rapidshare.com/files/374206914/mlct25-full.rar

Here's the upgrade+install of 2.4

Pass is eric645sson.

Cost_Reducer

2010-04-14, 03:36 AM

Ladies :D and Gentlemens,

i must inform you, that release 4.3 is old since today. Now, R4.3.1 is avaiable.
In R4.3 they have corrected any bugs but they have also built in any new bugs.E******* style ... :p
The R4.3 isn`t able to give it to any costumers...

Regards,

CR

ofca

2010-04-21, 12:12 PM

Aye, I noticed the bugs after upgrading; had problems with ethernet switch and ETU3 module - decided to downgrade. Do you have a list of broken things they fixed? :)

foxpro

2010-04-21, 12:47 PM

You are a great man
thank you very much:p

Cost_Reducer

2010-04-22, 06:03 AM

Aye, I noticed the bugs after upgrading; had problems with ethernet switch and ETU3 module - decided to downgrade. Do you have a list of broken things they fixed? :)

only a release note but please note, that you can`t insert the modules how you like. In the Indoor installation manual is a recommendation for placing the plug in units but in my opinion is it better you don`t follow to this in any special configurations.
Insert the ETU3 into slot 6, NPU in Slot 7. Do you have a LTU for pdh traffic?

ofca

2010-04-22, 10:47 AM

It's an AMM 2p rack, so not much of a choice as to where to plug in the ETU3 :) - same thing with AMM 6p, after inserting NPU, not much of choices for ETU3 ;)

I don't use LTU yet.

Cost_Reducer

2010-04-22, 01:45 PM

It's an AMM 2p rack, so not much of a choice as to where to plug in the ETU3 :) - same thing with AMM 6p, after inserting NPU, not much of choices for ETU3 ;)

I don't use LTU yet.

OK, AMM2p doesn`t have any problems with the plug in units. But several of AMM6pD are faulty and have big problems with the configuration of ETU3/NPU3B and LTU12.
In my case, ETU3 was in slot 6, NPU3B in slot 7 and LTU in slot 8. I press BR (board replace) on LTU because i want to extract this unit and after extracting i saw on NPU was the red led was on and the yellow led was flashing.....
The NPU was restarting for 3 times and start up in fault mode. I cant`t reset the NPU in this AMM. I must take a new AMM and after 1hour of hard work the NPU works fine :mad:

Cost_Reducer

2010-05-30, 05:10 AM

OK, AMM2p doesn`t have any problems with the plug in units. But several of AMM6pD are faulty and have big problems with the configuration of ETU3/NPU3B and LTU12.
In my case, ETU3 was in slot 6, NPU3B in slot 7 and LTU in slot 8. I press BR (board replace) on LTU because i want to extract this unit and after extracting i saw on NPU was the red led was on and the yellow led was flashing.....
The NPU was restarting for 3 times and start up in fault mode. I cant`t reset the NPU in this AMM. I must take a new AMM and after 1hour of hard work the NPU works fine :mad:

Update:

Problem fixed...Slot 8 is reserve for a redundant NPU is later releases....so you can`t plug in the LTU12 into slot 8 and SAU3 into slot 9....chance this position and you will be happy ;)

for the freaks.... software baseline 4.3.2 will comming soon :p

Dorinel

2010-06-11, 08:46 PM

Yes i have good news for all E******* fanatic guys here....

I got baseline 4.3 in this week and i will share it here with you guys:D

I've heard that a new version of mlk craft is out ...the 2.7 , is that true?
when I connect to TN E******* whit craft terminal 2.5 apears a message that tells me tha my craft terminal version is older then the FW in the NE . the FW of the NE is 4.3 . Correct me if I am wrong ! Thanks !!

bassem_16

2010-06-11, 09:03 PM

there is a 2.8 and a 2.9 version as well from ML CT

Dorinel

2010-06-11, 09:05 PM

there is a 2.8 and a 2.9 version as well from ML CT
Great !! does anyone have it ? can we have a download link?
thanks !!

Cost_Reducer

2010-06-12, 03:36 AM

Hi ,
I've heard that a new version of mlk craft is out ...the 2.7 , is that true?
when I connect to TN E******* whit craft terminal 2.5 apears a message that tells me tha my craft terminal version is older then the FW in the NE . the FW of the NE is 4.3 . Correct me if I am wrong ! Thanks !!

yes thats right. Craft Terminal 2.7 is a part of the baseline package 4.3.1...
Craft Terminal 2.5 expect baseline 4.3. It seems that baseline 4.3.1 runs on your TN. You can find here in the forum the craft terminal 2.7

Dorinel

2010-06-20, 10:18 PM

Hi ,

yes thats right. Craft Terminal 2.7 is a part of the baseline package 4.3.1...
Craft Terminal 2.5 expect baseline 4.3. It seems that baseline 4.3.1 runs on your TN. You can find here in the forum the craft terminal 2.7
Thanks ! Do you have the link ? Couse I can't find it .

Cost_Reducer

2010-06-20, 10:48 PM

Thanks ! Do you have the link ? Couse I can't find it .
fuck... it seems that isn`t a link into this forum for download because i havn`t upload the software ....:(:(

Dorinel

2010-06-20, 11:00 PM

fuck... it seems that isn`t a link into this forum for download because i havn`t upload the software ....:(:(
I will be greatfull to You if u can upload it . E******* never give us the latest software...I don't know why :confused: .The last mlk craft terminal that they gave it to us is the 2.4 that has a ftp server username bug .doesn't alow anonymous username . Thanks to you I got the 2.5 vers that fix this bug. Txs a lot