PDA

View Full Version : Question help needed allgon x40 radio



Thanos
2010-01-28, 06:23 AM
Anybody around has any experience with this radio? because I´m having some problems with it, so if anyone has some ideas about it your help will be appreciate, the problem is the next.

I´m receiving a fari decent rsl (around -54dbm) and a really high FEC (not less than 250000) at first we thought it was a bad antenna alignment so we did it again, and found that wasnt the problem because one of the channels its working ok, next thing was to check modules to see if the MOD, or the receiver module had some kind of failure but those were ok, as well as the RSP module, at last someone saw a curve too narrow and said we are having that problem because probably the waveguide suffered some deformation because the curve its too narrow, we used a site master and found a big spike located near the connector of the antenna and another nearby the curve, but just in one channel not the other, could it really this problem affect just 1 channel and not the other?

thank you in advance!.