PDA

View Full Version : LG CU500 / TU500 Setup Notes



satan777
2010-01-11, 02:08 PM
Hi

The commands the phone QUALCOMM LG. For receive WCDMA and GSM Layer 3 messages.

without PASS....


add Rep and thanks....:p

hugotg83
2010-11-29, 02:51 AM
Thank you so much for this procedure,

I have a question: I have to do this procedure every time turn off/on the phone???

uel888
2010-11-29, 04:37 AM
Hi

The commands the phone QUALCOMM LG. For receive WCDMA and GSM Layer 3 messages.

without PASS....


add Rep and thanks....:p

Can we apply this to all LG phones having a qualcom pocessor?

andrew
2010-11-29, 06:52 AM
I thought it was qualcomm command :)
Thanks anyway.

Roman99
2010-11-29, 08:40 AM
Hi

The commands the phone QUALCOMM LG. For receive WCDMA and GSM Layer 3 messages.

without PASS....


add Rep and thanks....:p

Thanks for sharing!

But I don't see any figures in the DOC file.
Just blank spaces. :(

kamy
2010-11-29, 01:31 PM
Thanks for sharing!

But I don't see any figures in the DOC file.
Just blank spaces. :(

actually it is not necessary, by following the instruction on the handset screen, you will.

hugotg83
2010-12-01, 12:51 AM
It Works!!!!

I connect the LG on TEMS 9 and run a voice call script, but the radio parameters are not complete, only receive Rxlev, RxQual, MS Power Control Level, TA, and RL Timeout Counter(Max); but FER, C/I, DTX doesn't appear on the screen.

I know that this model is fully supported by TEMS, because time ago, I rent a Tems equipment and comes with a LG CU500 phone, and it shows me all the parameters.