essalvador
2009-12-25, 06:54 PM
Bonjour,
Dans le matériel B9 d'alcatel et lors d'assignement SDCCH, je remarque toujours une congestion pour certains cellules pourtant leurs SDCCH_load_BH étant inférieur à 10% (leurs location update étant aussi inférieur à 50%).
J'ai examiné les voisines de ces cellules (pour pouvoir dire s'il y a des voisines qui ont les même couples bsic,bcch) mais toujours rien. En revanche, ils y a certains voisines qui ont les mêmes Bcch. Donc ma question est ce que avoir le même bcch d'une voisine et son homologue (son voisine du voisine) pourra générer un spurious rach (et donc une congestion SDCCH).
Si oui dois-t-on alors changer les BCCH ?
Merci d'avance!
En anglais:
Hello,
In hardware alcatel B9 at SDCCH assignment, I always notice some congestion but their SDCCH_load_BH cells was less than 10% (location update is also less than 50%).
I have reviewed the neighboring cells (so you can tell if there are neighbors who have the same couple BSIC, BCCH) but still nothing. However, they are some neighbors who have the same BCCH. So my question is what have the same BCCH of a neighbor and its counterpart (its neighbor's neighbor) will generate a spurious rach (and therefore congestion SDCCH).
If yes do we then change the BCCH?
Thank you in advance!
Dans le matériel B9 d'alcatel et lors d'assignement SDCCH, je remarque toujours une congestion pour certains cellules pourtant leurs SDCCH_load_BH étant inférieur à 10% (leurs location update étant aussi inférieur à 50%).
J'ai examiné les voisines de ces cellules (pour pouvoir dire s'il y a des voisines qui ont les même couples bsic,bcch) mais toujours rien. En revanche, ils y a certains voisines qui ont les mêmes Bcch. Donc ma question est ce que avoir le même bcch d'une voisine et son homologue (son voisine du voisine) pourra générer un spurious rach (et donc une congestion SDCCH).
Si oui dois-t-on alors changer les BCCH ?
Merci d'avance!
En anglais:
Hello,
In hardware alcatel B9 at SDCCH assignment, I always notice some congestion but their SDCCH_load_BH cells was less than 10% (location update is also less than 50%).
I have reviewed the neighboring cells (so you can tell if there are neighbors who have the same couple BSIC, BCCH) but still nothing. However, they are some neighbors who have the same BCCH. So my question is what have the same BCCH of a neighbor and its counterpart (its neighbor's neighbor) will generate a spurious rach (and therefore congestion SDCCH).
If yes do we then change the BCCH?
Thank you in advance!