PDA

View Full Version : 为什么克隆TEMS手机没有原版手机信号好?



GEZA
2007-03-31, 06:11 PM
TEMS手机软件的版权保护机制:
TEMS测试手机和普通的爱立信手机在硬件上是一摸一样的;不同就是手机的软件,所以才有可能把普通的手机通过刷软件改成TEMS手机;不过世面大部分是克隆的TEMS手机,而不是和原版手机一模一样的,表面上的区别是IMEI是克隆的,其他最根本的区别是一个rf calibration data的参数也是克隆的,而不是手机本身的那个。

这个参数的不同导致了克隆的手机达不到普通手机的效果,因为不同手机的OUTPUTPOWER参数是不一样的,如果都用同样的rf calibration data参数的话,手机的效果就会有差异。
那么为什么不用手机原来的rf calibration data参数呢?
那是因为还有个CHECKSUM的计算,TEMS checksum 8字节,它是根据IMEI,rf calibration data和TEMS FLAG来计算的:
IMEI的长度是9字节;
rf calibration data是32字节;
TEMS flags 是60字节;
TEMS checksum 是8字节;

不知道如何计算这个TEMS CHECKSUM导致只能把上面四个参数克隆下来写到新手机里,这样虽然可以用,但是效果就会有点差别,运气好的话,那个rf calibration data参数刚好和你的手机差不多的话,手机的效果还可以;如果差别很大的,手机的效果就很差了,这也是那些克隆手机制作者热衷于交换手机FLASH的一个原因吧!

hua1687
2007-03-31, 07:17 PM
请问下,楼主知道这个怎么算法吗,能把这求和的说明白些吗

GEZA
2007-03-31, 07:20 PM
原帖由 hua1687 于 2007-3-31 18:17 发表 http://www.5inetop.cn/images/common/back.gif (http://www.5inetop.cn/redirect.php?goto=findpost&pid=318&ptid=69)
请问下,楼主知道这个怎么算法吗,能把这求和的说明白些吗

我也不知道这个算法,现在就算知道了也没有多大的作用了。

hua1687
2007-03-31, 07:24 PM
不是要懂得这原理才能克隆吗

GEZA
2007-03-31, 07:26 PM
不懂算法的就把正版手机的这四个参数都拷贝到克隆手机上啊。

hua1687
2007-03-31, 07:46 PM
可我们也不知到怎么去找这四个参数啊

hua1687
2007-03-31, 09:44 PM
他们是在原来的SBN文件里,还是TEMS的FLASH里

GEZA
2007-04-01, 10:40 AM
TEMS的FLASH里

hua1687
2007-04-07, 08:41 PM
我再找个感觉试用下,看可以不可以,

phkchris
2007-05-12, 01:25 AM
这和智能手机的原理是差不多.嘿嘿.PPC的手机信号就一LAJI,比当年的小灵通还可怜!

firewise
2007-05-22, 09:56 PM
看可以不可以............

haih
2007-06-05, 07:01 PM
看来克隆并不是一个理想的解决方法

cybg2000
2007-06-08, 09:28 PM
请问下,楼主知道这个怎么算法吗,能把这求和的说明白些吗

GEZA
2007-06-08, 10:57 PM
我不知道这个算法的具体细节,只是知道有这么个算法。

aming.ou
2007-06-25, 03:08 AM
如果可以知道算法,也知道每个参数的意思,能按出厂的参数重新计算,那就好了。

GEZA
2007-07-06, 09:51 PM
如果你能算T68/T618 的checksum,这样就用原来手机的rf calibration data和IMEI了,刷机也方便多了。
只要用DIV就可以刷了。

chengduyouke
2007-07-18, 06:08 PM
看来六币不怎么坚挺哦

toty
2007-07-22, 10:29 PM
很贵的说......

baoshizhi
2007-07-24, 10:11 PM
价格还可以接受,毕竟人家也是耗费了相当大的精力来破解这个算法的。

qingren
2007-09-28, 03:03 PM
不知哪位老大有这个算法,如果分享就好了。

newyzy
2007-11-30, 07:20 PM
TEMS手机软件的版权保护机制?
?学习

Prapor
2008-01-17, 04:42 AM
многа букаф, ниасилил

fmstereo
2008-02-26, 10:31 PM
原来还有这个理儿!设备制造商还真行啊!

xiaowuhet
2008-03-02, 01:06 AM
学习学习中!!
楼主辛苦了!

cool_lake
2008-03-06, 04:29 PM
那不是还有比测试机信号好的克隆手机阿

浪人321
2008-05-09, 01:23 AM
这个早就听说了!!!

浪人321
2008-05-09, 01:25 AM
也不知道怎么算的!!!

danish1234
2008-09-10, 02:55 AM
Good Stuff!

yy19820503
2009-03-06, 01:54 AM
现在知道运来是这样啊。

anusaggi1
2009-03-13, 04:29 PM
thanks for this

yy19820503
2009-03-28, 05:36 PM
主要还是看知道那个算法,要不也没什么用

abdussamih
2009-03-28, 07:39 PM
TEMS手机软件的版权保护机制:
TEMS测试手机和普通的爱立信手机在硬件上是一摸一样的;不同就是手机的软件,所以才有可能把普通的手机通过刷软件改成TEMS手机;不过世面大部分是克隆的TEMS手机,而不是和原版手机一模一样的,表面上的区别是IMEI是克隆的,其他最根本的区别是一个rf calibration data的参数也是克隆的,而不是手机本身的那个。

这个参数的不同导致了克隆的手机达不到普通手机的效果,因为不同手机的OUTPUTPOWER参数是不一样的,如果都用同样的rf calibration data参数的话,手机的效果就会有差异。
那么为什么不用手机原来的rf calibration data参数呢?
那是因为还有个CHECKSUM的计算,TEMS checksum 8字节,它是根据IMEI,rf calibration data和TEMS FLAG来计算的:
IMEI的长度是9字节;
rf calibration data是32字节;
TEMS flags 是60字节;
TEMS checksum 是8字节;

不知道如何计算这个TEMS CHECKSUM导致只能把上面四个参数克隆下来写到新手机里,这样虽然可以用,但是效果就会有点差别,运气好的话,那个rf calibration data参数刚好和你的手机差不多的话,手机的效果还可以;如果差别很大的,手机的效果就很差了,这也是那些克隆手机制作者热衷于交换手机FLASH的一个原因吧!

TEMS mobile software copyright protection mechanisms:
TEMS and the general test of E******* mobile phone handset on the hardware are the same copy; mobile phone software is different, so will it be possible to put an ordinary mobile phone software through the brush into a TEMS mobile; various aspects of society but most of the TEMS mobile phone cloning , rather than exactly the same and the original mobile phone, is the difference between the surface IMEI cloning are other differences between the most fundamental is a parameter of the rf calibration data is cloned, rather than the mobile phone itself.

This parameter has led to the cloning of different mobile phone handset of the effect of less than ordinary, because different parameters OUTPUTPOWER the cell phone is not the same as, if using the same parameters of the rf calibration data, then the effect of mobile phone will have differences.
So why do not the original cell phone rf calibration data parameters it?
That is because the calculation also CHECKSUM month, TEMS checksum 8 bytes, which is the IMEI, rf calibration data and to calculate the TEMS FLAG:
IMEI is the length of 9 bytes;
rf calibration data are 32 bytes;
TEMS flags are 60 bytes;
TEMS checksum is 8 bytes;

Do not know how to calculate the cause TEMS CHECKSUM above four parameters can only write down the new cell phone cloning, the way can be used, but the effect would be little difference between the best of luck, the rf calibration data parameters that is just and your mobile phone almost , then the effect of mobile phone can also be; if a lot of difference, the effect of mobile phone on the poor, and this is also the producers of those cloned cell phone handset FLASH keen to exchange one of the reasons for it!

deadfish
2009-06-27, 07:30 PM
看来能解密出算法的人也挺厉害的....

deadfish
2009-06-27, 07:31 PM
现在都给手机上的那些什么固件什么的搞糊涂了...分不清南北了...

manabhanjanm
2009-07-27, 02:34 AM
can any one help me..in drive test......

manabhanjanm
2009-07-27, 02:35 AM
does anyone have..study material regarding drive test...

manabhanjanm
2009-07-27, 02:35 AM
plz post something regarding drive test

manabhanjanm
2009-07-27, 02:38 AM
and finally 10....................

gyb820703
2009-09-11, 06:45 PM
我用laser 提供的刷机包 和div8.4刷机工具 刷出了中文版本 tems t618 。很好用连接tems 8.0.3 可以正常使用!

book_tmp
2010-01-01, 09:55 PM
原来如此呀?现在知道TEMS也能克隆。

cioprr
2010-03-01, 07:31 AM
Thanks for your post

mobilek530
2010-03-14, 11:32 PM
Hi

Please share the basic of TEMS pocket and INvestigation working. If any document available please share / mail me at tchlvr@gmail.com

Thanks in advance