Import driver test data to Atoll???

[liukang]

Hi all, anyone can help me import driver test data to Atoll to calibrate propagation model???


Thanks and BR!!!:rolleyes:

[nabil el haddani]

Hi man,

The Procedure for importing DT on atoll :

– Standard import as in Excel

– Mandatory information

Position of measurement points
ID of Active set members or ID of Scanned cells


– You can import any additional information related to measurement
points

– Definition and storage of import configurations

– Multiple import can be done by selecting several files.

plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:


Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements


Best Regards

Nab

[secretagentx2]

Hi man,

The Procedure for importing DT on atoll :

– Standard import as in Excel

– Mandatory information

Position of measurement points
ID of Active set members or ID of Scanned cells


– You can import any additional information related to measurement
points

– Definition and storage of import configurations

– Multiple import can be done by selecting several files.

plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:


Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements


Best Regards

Nab

Good share.

Has anyone ever used Scan mode TEMS DT logs in Atoll for Model Tuning? I have DT of a cluster in Scan mode to fine tune the current Propagation Model. Clutter morphology is Urban.

How much accurate is its results for calibration as compared to CW measurements?:confused:

[petro]

Good post. Thanks for sharing!

[fellucia811]

Hi man,

The Procedure for importing DT on atoll :

– Standard import as in Excel

– Mandatory information

Position of measurement points
ID of Active set members or ID of Scanned cells


– You can import any additional information related to measurement
points

– Definition and storage of import configurations

– Multiple import can be done by selecting several files.

plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:


Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements


Best Regards

Nab

Is it possible to upload this file somewhere else?
Thanks in advance!