RF Site Survey

[alkesh]

Hi,

What is RF Site Survey? How is it carried out ?
What tools are essential?

-With respect to GSM and CDMA


Thanks

[gigel]

Hi,

What is RF Site Survey? How is it carried out ?
What tools are essential?

-With respect to GSM and CDMA


Thanks


to much to tell... :o

[alkesh]

If you can please share some details in brief or
any document. That would be useful.

Thanks.



to much to tell... :o

[rheyra]

Hi Alkesh,
RF site survey should accomodate:
- Traffic distribution (such as where people live mostly), so you have to orientate your site to covers this area
- What your purpose of this site survey? There can be coverage reason, capacity reason, and quality reason. For coverage, please make sure that the site you propose can cover wider, means parameters you have to consider is: ground height, antenna height plan, azimuth plan, and antenna type (includes beamwidth, gain, etc..). For capacity, please make sure about antenna height/type and also traffic erlang offered that can fulfill that area. For quality reason, usually this is about antenna type, the most suitable point you put site to make sure that spots problem will be covered.
- During RF Sites Survey, you have to balance between RF needs and also agreed equipment between vendor and customer.
This is a short desc about RF Site Survey.
Hopefully can help.

BR//Rheyra
<If you think this is useful, pls don't forget add reputation..>

If you can please share some details in brief or
any document. That would be useful.

Thanks.

[basith.aces]

Dear Alkesh

Rf survey

1, Rf survey for which site whether for capacitive site or coverage site
capacitive site survey is done for decreasing the load on existing sites
coverage survey is done for providing the coverage
2,Reference Coordinates will be given and Reach the site location and chose best 3 location ...lacation 1 will be priority
3,Take the address of the owners if possible
4,Take the pictures of the clutters and hotspots...
5,Decide the height of the Tower
6,decide the Orientation of the Antennas and its height.

These are the brief info about RF Survey

Plz add rep if it is helpful to you

BR Basith.aces

[alkesh]

What about the RF surveys which are done
after the site is up and running?

The details you mentioned will be done at initial stage
when you need to set up site and do planning.




Dear Alkesh

Rf survey

1, Rf survey for which site whether for capacitive site or coverage site
capacitive site survey is done for decreasing the load on existing sites
coverage survey is done for providing the coverage
2,Reference Coordinates will be given and Reach the site location and chose best 3 location ...lacation 1 will be priority
3,Take the address of the owners if possible
4,Take the pictures of the clutters and hotspots...
5,Decide the height of the Tower
6,decide the Orientation of the Antennas and its height.

These are the brief info about RF Survey

Plz add rep if it is helpful to you

BR Basith.aces

[rheyra]

Hi alkesh,
do you mean site audit?

BR//Rheyra


What about the RF surveys which are done
after the site is up and running?

The details you mentioned will be done at initial stage
when you need to set up site and do planning.

[kais]

Site Survey and validation.


thanks and reputation will be needed.


PM for pass.

[alkesh]

I am not sure about that. I am a beginner. So
if you could explain.



Hi alkesh,
do you mean site audit?

BR//Rheyra

[parto_tegal]

Thought that RF Survey is a part of above discussed Site Hunting / Site Searching / Site Acquisition / Technical Site Engineering survey...

The aim is to make sure that all required RF resources will be available on the selected site candidate, including the mobile network RF bandwidth requirement, approach link / transmission channel availability (interferrence free), LOS (line-of-sight) etc.

We use an RF Scanner, Spectrum Analyzer, etc to do this....

Is that? But mostly I am wrong.... :D

Regards
parto_tegal

[kais]

Now it's for Free !!

[justdream]

It's not in English

[kais]

http://rapidshare.com/files/243698763/site_survey.rar.html

[oldie]

The attached file might also help
This can also be used for TSS (Technical Site Survey)
http://rapidshare.com/files/243700291/Site_Survey_Forms_-__Best_Practices_Guide_Supplement_.rar

[Mazari]

Can mention specify that the document is not in English?? that would be helpful.


Now it's for Free !!

[kais]

It's not in English

u can get english version below.



thanks to add reputation !

[iCloud]

Hi
This is guidline for Site Aquistion. Maybe it usefull for u
Cheers....

[yousuf14]

Please let me know how I can get access to the files to download them.

[iCloud]

Please let me know how I can get access to the files to download them.

I think u must post more thread, share more knowledge to increase reputation

[inzajhi]

site audit is different than site survey.

for the site audit you need to check the VSWR and Distance to fault from the bottom ( connector jumper feeder which connect in the BTS) to the antenna, power transmit, tilt and azimuth of the antenna, etc


for the site survey already mentioned before.

may be the other can add some explanation for alkesh

[iCloud]

site audit is different than site survey.

for the site audit you need to check the VSWR and Distance to fault from the bottom ( connector jumper feeder which connect in the BTS) to the antenna, power transmit, tilt and azimuth of the antenna, etc


for the site survey already mentioned before.

may be the other can add some explanation for alkesh

Ys
Site Aquistion start at the beginning of project. The meaning is finding the place for BTS
Site Audit start at the end of project, when u finished install equipments then on air --> need to check to ensure about the quality

[fey_yi]

hello,
can i donwload your file

[pjulgan]

Hi,

If its RF Audit Survey you will just need to take mostly Antenna Information.

1. Antenna Orientation
2. Sector Coverage
3.Mechanical Tilt
4.Electrical Tilt
5.Antenna High
6.Check for Bloacking
7.Check Showdowing
8.Check Plan Data and Compare it to Implemented
10.Panoramic Photos

Tools :
1.Compass
2.Digital Camera
3.Inclinometer
4.Measuring Tape
5.GPS (for coordinates validation)

[rejreyes]

This may be an old document regarding RF survey, but sure really hit the spot... :D

If ever this document is redundant, do kindly remove it as necessary MODs... ;)

Attachment has no password, please feel free to use it... ;)