PDA

View Full Version : 2G Transmission KPIs



Ghost78
2016-07-08, 09:27 PM
Dear all;

I need your help; I want to check the transmission performance in our 2G netwrok, before with TDM based Abis I used to extract the DIP/RBLT number and match them with the site name before running the BO report, now with Abis over IP, it is somehow different, so, please to share the methode to check 2G transmission.

B.R

Ghost78
2016-07-10, 05:26 AM
Hi;

anybody can help.

BR

Ghost78
2016-07-12, 10:57 PM
Hi everybody;

there no one who can share his knowledge with me, I'll be very gratefull if some one helps me on this.

B.R

plannerguy
2016-07-24, 03:37 PM
Hi

For IP you have packet loss counters on OSS .

Rgds
Plannerguy

consultant
2016-08-02, 06:33 PM
Hi,

Here are some trace comands on PGW RP.

rrssp:scgr=<scgr>;
TERDI:RP=<PGW RP>;
apt trace;
apt ifconfig;
apt routelist;
apt abis getbscdata;
apt abis getstat all;
apt abis getsubdevdata;
apt abis getabisinddata;
apt abis getscdata;
apt abis getscroutingtable all;
apt abis gettgroutingtable all;
apt abis scovldlog <SC> -long;
apt abisip get jitterd;
apt abisip get tginfo all;
apt abisip get pstuinfo all;
apt abisip get l2tpinfo;
apt abisip get ipovldinfo;
apt abisip get tginfo tg <TG>;
apt abisip tgovldlog <TG> -long;
apt abisip apilog <TG>;
apt pgsl getstat;
apt pgsl getpfpdata;
apt pgsl getgphdata;
apt csfp getstat;
apt csfp getcsfpdata;
apt csfp getagwdata;
END;

more details are available on TERDI help

jndomingo
2017-05-05, 12:55 AM
Hi consultant,

Thanks for sharing.

1. Is there a way to change Homing <PGW RP> of these site. If YES, what is proper way and script.

More power

Regards

consultant
2017-05-05, 03:44 AM
Hi consultant,

Thanks for sharing.

1. Is there a way to change Homing <PGW RP> of these site. If YES, what is proper way and script.

More power

Regards

Hi jndomingo,

There is an Alex procedure for change CTH RP (EVO BSC): Radio Control Administration, CTH Load Balancing, Initiate

RBS can be moved to the other CTH RP by command RALII:SCGR=<scgr>;
RP load check by command: raldp:rp=all;
BR

ahrouch
2017-07-13, 07:37 PM
Hi,

for TDM, I use ES/SES in Eniq to Check the E1 performances. Below an Exp

ELEM Date DIP ES SES
BRK_EB1 23/05/2017 2RBL4 1 0
BRK_EB1 25/05/2017 2RBL4 1 0
NAD_EB1 23/05/2017 105RBL4 2 0
NAD_EB1 23/05/2017 126RBL4 4 1
NAD_EB1 23/05/2017 14RBL4 4 1
NAD_EB1 23/05/2017 160RBL4 1 0
NAD_EB1 23/05/2017 169RBL4 4596 21