PDA

View Full Version : How to Improve Latency



Lamboy
2015-10-09, 02:08 PM
is there anyone knew how to improve latency?
which parameter that i can modify?


thanks in advance.

electron
2015-10-09, 02:47 PM
is there anyone knew how to improve latency?
which parameter that i can modify?


thanks in advance.

Hi,


To improve Latency in LTE you may work on DRX parameters. It will help a lot.


Cheers

sak2e
2015-10-09, 05:09 PM
Hi,

You can change parameter uplink improve latency reac timer. But will impact your UL thp

Lamboy
2015-10-09, 06:25 PM
Hi,


To improve Latency in LTE you may work on DRX parameters. It will help a lot.


Cheers

do u have DRXs parameter recommendation?

BR//

Lamboy
2015-10-09, 06:27 PM
Hi,

You can change parameter uplink improve latency reac timer. But will impact your UL thp

Thanks for your information,
anyway, previously it had been changed to maximum but latency was not improve too much. do u have another recommendation?

BR//

electron
2015-10-09, 08:51 PM
do u have DRXs parameter recommendation?

BR//

Hi,

For Nokia no, But concept is the same in all vendors, Beside DRX setting you may change inactivity timer as well.


Cheers

DJ Download
2015-10-10, 03:32 AM
Yup this is correct. It will impact the number of available UL PRB for PUSCH.
This RTT stuff can be easily manipulated by this parameter, normally being used during benchmark.


Hi,

You can change parameter uplink improve latency reac timer. But will impact your UL thp

DJ Download
2015-10-10, 03:34 AM
Depends, if you have VoLTE also activated then vendors normally recommend to set both shortDrxCycle and LongDrxCycle to 40ms.


Hi,

For Nokia no, But concept is the same in all vendors, Beside DRX setting you may change inactivity timer as well.


Cheers

marcengo
2015-10-16, 07:38 AM
RACH/T300 also affects the latency, keep it in mind.

Lamboy
2015-10-16, 06:42 PM
Hi,

For Nokia no, But concept is the same in all vendors, Beside DRX setting you may change inactivity timer as well.


Cheers

for your recommendation.

thanks

Lamboy
2015-10-16, 06:44 PM
Yup this is correct. It will impact the number of available UL PRB for PUSCH.
This RTT stuff can be easily manipulated by this parameter, normally being used during benchmark.

thanks a lot, it worked.

electron
2015-10-17, 12:03 AM
thanks a lot, it worked.

Hi,

Do you have chance to share change result / report if you prepared it ?


Cheers

justdream
2016-03-24, 05:15 AM
thanks a lot, it worked.

Dear, Do you mind please to share results!