PDA

View Full Version : Aviat Upgrade



Cepillo
2015-06-20, 02:51 AM
Hello,

I have a plan to upgrade Aviat TDM network to Hybrid.

ODU 300 and 100 to ODU 600
RAC 30 and 10 to RAC 60 and 30V3
Add DAC GE
SW Version from 03.06.22 to higher then 5.x.



Can I use the same old:

antennas (is there no any issue with flange, etc.)
NCC (after SW upgrade)
NPC
DAC 16X, DAC 4X (for TDM service)
AUX
power unit
FAN
chassis






Thanks!

bojo06
2015-06-22, 08:31 PM
Hi,
The same networks work good with SW 07.02.43. For Example:ODU 300HP, RAC60E, INUv2, NPC,NCC DAC16xE1v1, old SW 04.04.85

Cepillo
2015-06-22, 09:14 PM
Thanks for the answer,

Below is the typical HW and SW configuration of our hop.

Please advise, what should we replace and what we can leave there to get hybrid?

37832

bojo06
2015-06-22, 10:17 PM
Invalid Attachment specified!

simog72
2015-06-22, 11:25 PM
AVIAT has recently launched CTR series
someone can share some manual on this?

Cepillo
2015-06-23, 12:48 AM
Updated

RAC Plug-in Licensed Allocated Capacity
RAC2 Yes 10xE1
RAC3 Yes 10xE1


Plug-in Part Number Plug-in Types SW Version HW Revision
NCC EXN-002 INUv2 03.06.22 4
RAC2
ODU2 EKS-07-0161-102 ODU 300 SP 05.01.44 1
RAC3
ODU3 EQS-07-0161-102 ODU 300 SP 03.06.22 10
DAC7 EXD-040-001 DAC 4xE1/DS1 3
NPC10 EXS-001 NPC 5

zins
2015-06-23, 03:49 PM
AVIAT has recently launched CTR series