PDA

View Full Version : Channel Type: Dynamic PDCH


justdream
2015-03-04, 08:07 PM
Dears,

What's the importance of having Parameter Channel Type with Settings of Dynamic PDCH

While we already could enable Dynamic PDCH conversion using: MAXPDCHRATE
even if we don't have Channel Type with Settings of Dynamic PDCH
Bifeaza
2015-04-04, 04:01 AM
Hi,
Could you be more specific in your post? what's the actual problem?
Cheers.
awa_207
2015-04-14, 11:02 AM
If you set MAXPDCH to a large value, the KPI of CS domain will be degraded
RF engineer
2015-04-14, 02:18 PM
Dears,

What's the importance of having Parameter Channel Type with Settings of Dynamic PDCH

While we already could enable Dynamic PDCH conversion using: MAXPDCHRATE
even if we don't have Channel Type with Settings of Dynamic PDCH


you can set channel type to EGPRS preferred so that you let MS with GPRS&EGPRS access to network and related to MAXPDCHRATE just increase dynamic PDCHs where you have less CS traffic .

BR
miles12
2015-11-02, 12:57 PM
you can set channel type to EGPRS preferred so that you let MS with GPRS&EGPRS access to network and related to MAXPDCHRATE just increase dynamic PDCHs where you have less CS traffic .

BR

Dear Sir
How can i activate EGPRS preferred in huawei netwotk?