PDA

View Full Version : Question Flashing T610 TEMS question



yy19820503
2009-04-19, 06:36 PM
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"


the fourthstep is fail!!!!

can you help me!!!!!!!!!!!!!!!!!!!!!!!!111

parto_tegal
2009-04-19, 11:54 PM
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"


the fourthstep is fail!!!!

can you help me!!!!!!!!!!!!!!!!!!!!!!!!111

Hi
Please refer to the followings:
[Only registered and activated users can see links]

Suggestion:
- Retry to do it again and again...Make sure your battery is full...
- If your phone is locked to one operator, try to unlock it first (using free program as pBBSE etc)

Good luck
parto_tegal

kadoel
2009-04-20, 02:16 AM
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"


the fourthstep is fail!!!!

can you help me!!!!!!!!!!!!!!!!!!!!!!!!111

use this
[Only registered and activated users can see links]
without 4step fail :D

yy19820503
2009-04-21, 12:17 AM
I tried several times to determine the battery also is filled with red. Cell phones are not locked.
Is still the problem.
help me!!!!!!!!!!1

parto_tegal
2009-04-21, 12:50 AM
Hi

Thought this is a very tricky procedure to get it run well...

1. Make sure to clean the phone connector with a good cleaner agent
2. Make sure to charge your battery fully
3. At the first, do not connect the cable and release the battery!
4. Do the process on following procedure:
- Run the DOS command
- Connect the cable
- Insert the battery and hold with your hand
- Wait until pass all the bypass procedures,
- Slide the battery cover carefully when you feel tired holding it :p

Good luck
parto_tegal

yy19820503
2009-04-25, 05:59 PM
[quote=parto_tegal;46317]Hi

Thought this is a very tricky procedure to get it run well...

1. Make sure to clean the phone connector with a good cleaner agent
2. Make sure to charge your battery fully
3. At the first, do not connect the cable and release the battery!
4. Do the process on following procedure:
- Run the DOS command
- Connect the cable
- Insert the battery and hold with your hand
- Wait until pass all the bypass procedures,
- Slide the battery cover carefully when you feel tired holding it :p

Good luck




thank you for parto_tegal
it's ok

parto_tegal
2009-04-25, 06:15 PM
thank you for parto_tegal
it's ok

Thanks button and reputation are there... You knows how to thanks...
Regards
parto_tegal

armagedd0n
2009-04-25, 08:56 PM
thank you for parto_tegal
you are superman