PDA

View Full Version : HO Failure rate high from 3G-2G



saifadin
2014-01-30, 05:25 AM
Hi
I have high HO Failure rate from 3G(U1900)-2G(1900) in the whole network? i Checked everything, i did not find anything wrong!!!!!!

Any previous experience about this issue?

Regards

electron
2014-01-30, 12:32 PM
Hi,


Please share your vendor as well as all activities which you performed for improvement we may further help you to find the problem.


Cheers
Hi
I have high HO Failure rate from 3G(U1900)-2G(1900) in the whole network? i Checked everything, i did not find anything wrong!!!!!!

Any previous experience about this issue?

Regards

saifadin
2014-01-30, 11:11 PM
The vendor is NSN, i checked the FMCG, HOPG, ADJG and everything looks normal, but it look like we have something wrong because the failure rate is from 3% to 100% in the 3G-2G handover.

dtvt2
2014-02-13, 12:12 PM
hi friend
- pls check counter utran_not_able_exc_ishho_rt and utran_not_able_exc_ishho_nrt

lotto009
2014-02-13, 04:35 PM
Do you just check
-Sib 12 =enable ?
-2D&2F(RSCP&EcIo) and trigger time how much your set
-wrong bsic or ci ,bcch,lac,bsc name?
-SDCCH &tch block from 2GSM ?
Enjoy

talhafarooqi
2014-02-17, 09:36 PM
I understand that % wise its quite bad, what sort of fail amount are you looking at? is 2g vendor also NSN ?

yassanino
2014-05-07, 10:52 PM
Did you activate the BSIC verification PR file

captain_jejemon
2014-05-08, 01:38 AM
The vendor is NSN, i checked the FMCG, HOPG, ADJG and everything looks normal, but it look like we have something wrong because the failure rate is from 3% to 100% in the 3G-2G handover.

Hi Friend in 3% rate, what is the count? check the numerator.

kevin_h811
2014-05-10, 08:20 AM
Have you checked your neighboring definitions.3G to 2G and vice versa.Internal and External.

regards//