CME Offline to Display RET Values

[justdream]

Dears,

Do you know how to use CME Offline to Display RET values?

[gunpowder]

+ can we export All RET values of the network from CME/LMT ?

[justdream]

Dears,

Any update how to get RET values from CME

[RF engineer]

Dear

Look into snap but you need to be carefull that the Operation team correctly define the RET.

[justdream]

Dear, I followed your steps but it gives me blank Table

[RF engineer]

Dear, I followed your steps but it gives me blank Table

So it means it is not configured you need to check if the device which enable you to set RET is working or not required to be checked on site.

[justdream]

So it means it is not configured you need to check if the device which enable you to set RET is working or not required to be checked on site.

but when we check it from M2000 MML Command
it Displays RET values..
in same time nothing could be displayed on CME

[RF engineer]

You are using R13 or?

[justdream]

You are using R13 or?
Yes My release is R13

[RF engineer]

surprise iam using aslo R13 i have value .

As CME is huawei internal tool so i think you need to check with huawei may be CME has issue.

[justdream]

surprise iam using aslo R13 i have value .

As CME is huawei internal tool so i think you need to check with huawei may be CME has issue.

Are you using CME offline or online

[RF engineer]

Offline one Iam using

[Boraa]

can you share CME offline R15

[RF engineer]

Dear

I don't have R15 .

[KidAngel]

Dear, Could you help to share me the CME R13 installation file.