How to Display C2I on Actix

[GSM_Huawei]

to day ,I try analyze logfile Tems on Actix 4.05.175.140 but I don't see actix display C2I ,Meanwhite Actix 4.04 can display C2I on Idle mode and dedicate mode.
please help me .

[venom]

to day ,I try analyze logfile Tems on Actix 4.05.175.140 but I don't see actix display C2I ,Meanwhite Actix 4.04 can display C2I on Idle mode and dedicate mode.
please help me .

I'll tell you how to display C2I in Actix, by default this option is not enabled, you need to replace an xml. I'll provide you in my next post

[venom]

to day ,I try analyze logfile Tems on Actix 4.05.175.140 but I don't see actix display C2I ,Meanwhite Actix 4.04 can display C2I on Idle mode and dedicate mode.
please help me .

Ok Please find the attached XML which you need to copy at the following link

C:\Program Files\Actix\Analyzer\Bin\Extra

Note: You need to reopen actix after copying this XML !

You can view this xml and understand the structure. The XML file must contain a TEMS Name attribute, which should exactly match the name used in the export process from within TEMS Investigation. It should also contain a second attribute called TYPE which should always be set to dynamic. Once copied you need to load your TEMS logfile directly :)

Once the logfile is loaded, you'll see the C2I parameters in Downlink Measurements. To view C2I Worst you can create the binned query. Just Select the TEMS_C2I_Sorted_Value_Exp[0]. I have attached the snapshot for your reference, you can later define the ranges, in my case i have defined 4 ranges , 0 to 4, 4 to 9, 9 to 12 and 12 and above.

Hope that is helpful, cheers

[NILCTG]

@ ICCENGR & Other Actix Veterans


Hello Friends:

I been trying to show C/I from TEMS log files using event queries(drop call) in Actix 4.05.176.859. Snapshot of Query is attached here. Though C/I can be plotted on Map(as attribute), it is not shown in statistics explorer with the query I devised. Would anyone please tell me where did i go wrong, or how to show C/I in event query?

Thanks in advance.

*BTW I already copied & pasted the xml provided by ICCENGR.

[venom]

@ ICCENGR & Other Actix Veterans


Hello Friends:

I been trying to show C/I from TEMS log files using event queries(drop call) in Actix 4.05.176.859. Snapshot of Query is attached here. Though C/I can be plotted on Map(as attribute), it is not shown in statistics explorer with the query I devised. Would anyone please tell me where did i go wrong, or how to show C/I in event query?

Thanks in advance.

*BTW I already copied & pasted the xml provided by ICCENGR.

Send me the logfiles and i will look into it, thanks

[alibushehri]

Dear All,

here is the solution:

goto tools->Preference

Under general settings, you can find TEMS, expand it and checked the boxs next to CtoI whatever!

Good Luck

one more thing : THIS OPTION MAY NOT AVAILABLE IN 4.05.175.140 SO I SUGGEST YOU TO UPGRADE YOUR ACTIX TO HIGHER VERSION

[NILCTG]

C/I from TEMS was included from "Tools>Preference>TEMS" as I was able to plot it on the map. So what else could go wrong?



Dear All,

here is the solution:

goto tools->Preference

Under general settings, you can find TEMS, expand it and checked the boxs next to CtoI whatever!

Good Luck

one more thing : THIS OPTION MAY NOT AVAILABLE IN 4.05.175.140 SO I SUGGEST YOU TO UPGRADE YOUR ACTIX TO HIGHER VERSION

[venom]

C/I from TEMS was included from "Tools>Preference>TEMS" as I was able to plot it on the map. So what else could go wrong?

I guess u have found the solution, Guys read my post earlier, You have to select TEMS_C2I_Sorted_Value_Exp[0] for C/I Worst.

If you want to have C/I Best or something else then please look into the mapping chart provided in the help, thanks

[Inception]

hi ali
so whats the last version ?
if does any one has the the last version please share .

thanks in advance
best regards
lavin


Dear All,

here is the solution:

goto tools->Preference

Under general settings, you can find TEMS, expand it and checked the boxs next to CtoI whatever!

Good Luck

one more thing : THIS OPTION MAY NOT AVAILABLE IN 4.05.175.140 SO I SUGGEST YOU TO UPGRADE YOUR ACTIX TO HIGHER VERSION

[venom]

hi ali
so whats the last version ?
if does any one has the the last version please share .

thanks in advance
best regards
lavin

Lavin the latest version is April Release 2009. Search the Post in VIP Section !

[Inception]

hello
but i download the april 2009 from the forum
and setup so the last vesion not april 2009 because after instalation and run i saw my version is 4.0.175.140.
please help more .
best regards
lavin



Lavin the latest version is April Release 2009. Search the Post in VIP Section !

[venom]

hello
but i download the april 2009 from the forum
and setup so the last vesion not april 2009 because after instalation and run i saw my version is 4.0.175.140.
please help more .
best regards
lavin

Lavin, you must have installed the wrong version. Please check below the following versions:

APRIL RELEASE 2009 : 4.05.180.685 (latest) http://www.finetopix.com/showthread.php?t=4211&highlight=Actix+APR-2009
MARCH RELEASE 2009 :4.05.178.556
FEBRUARY RELEASE 2009 : 4.05.176.859

Check Again brother :)