Need to calculate the bandwidth (1Gbs) for Iub, Iur, IuCS, IuPS....RNC E*******

[elpirata]

I have one problem from the customer.
Need to calculate the bandwidth in RNC E*******.
The network has a bandwidth 1Gbs.
Need to calculate the bandwidth for all services, such as Iub, Iur, IuCS, IuPS....
How can I check how many percent using under each service?

BR,

[scorpion]

There is no direct thump rule but need lots of stats from your network to analyse and help you out...

[elpirata]

I have 67 points sach us:
pmr:


1) RNC Node Traffic Performance
2) RNC Node Traffic Performance, Hour by Hour
3) RNC Node Traffic Performance, ROP by ROP
4) RNC Module Traffic Performance
5) RNC Subrack Traffic Performance
6) RNC MP Load
7) RNC MP Load, Hour by hour
8) RNC CC Load, Hour by hour
9) RNC DC Load, Hour by hour
10) RNC PDR Load, Hour by hour
11) RNC UtranCell RRC Performance
12) RNC UtranCell Speech Performance
13) RNC UtranCell CS Data Performance
14) RNC UtranCell PS Data Performance
15) RNC UtranCell PS Throughput and NrUsers
16) RNC UtranCell HSPA Performance
17) RNC UtranCell HS Throughput and NrUsers
18) RNC UtranCell IRAT Performance
19) RNC UtranCell Soft HO Performance
20) RNC UtranCell Uplink RTWP / RSSI
21) RNC Worst 20 UtranCells for RRC Failure Rate Contribution
22) RNC Worst 20 Utrancells for Speech RRC Failure Rate
23) RNC Worst 20 Utrancells for Speech RAB Setup
24) RNC Worst 20 Utrancells for Speech Access Failure
25) RNC Worst 20 Utrancells for PS RRC Failure Rate
26) RNC Worst 20 Utrancells for PS RAB Setup
27) RNC Worst 20 Utrancells for PS Access Failure
28) RNC Worst 20 UtranCells for Speech Drop Rate Contribution
29) RNC Worst 20 UtranCells for PS Drop Rate Contribution
30) RNC Worst 20 UtranCells for HS Drop Rate Contribution
31) RNC Worst 20 UtranCells for Soft HO Failure Contribution
32) RNC Worst 20 UtranCells for High Uplink RTWP / RSSI
33) RNC IubLink RRC Performance
34) RNC IubLink Speech Performance
35) RNC IubLink CS Data Performance
36) RNC IubLink PS Data Performance
37) RNC IubLink Soft HO Performance
38) RNC IubLink Credits Usage (%)
39) RNC IurLink Drop Rate
40) RNC Node drop rate in UtranCells
41) RNC Node drop rate in IurLinks
42) RNC Module RRC Performance
43) RNC Module Speech Performance
44) RNC Module CS Data Performance
45) RNC Module PS Data Performance
46) RNC AtmPort RRC Performance
47) RNC AtmPort Speech Performance
48) RNC AtmPort CS Data Performance
49) RNC AtmPort PS Data Performance
50) RNC Subrack RRC Performance
51) RNC Subrack Speech Performance
52) RNC Subrack CS Data Performance
53) RNC Subrack PS Data Performance
54) RNC UtranCell Availability Report, Hour by Hour
55) RNC UtranCell RAB failure breakdown
56) RNC Q.Aal2 Setup Performance (Aal2Ap)
57) RNC Q.Aal2 Setup Performance (Aal2Ap) per QoS Class
58) UeRc BLER
59) RNC Paging Performance (requires activation of Userdef scanner, see SCS797846)
60) RNC Paging Performance, ROP by ROP (requires activation of Userdef scanner, see SCS797846)
61) Utrancell Paging Performance
62) RNC Used Capacities (IubThroughput and FachDchHsUsers), Hour by Hour
63) RNC IuPS throughput in kbps, Hour by Hour
64) EthernetSwitchPort Tput in Mbps, ROP by ROP
65) InternalEthPort Tput in Mbps, ROP by ROP
66) GigabitEthernet Tput in Mbps, ROP by ROP
67) Sctp PacketLossRatio, ROP by ROP

What you think, is it enough the counters for my task?

BR,

[ninjafine]

I have one problem from the customer.
Need to calculate the bandwidth in RNC E*******.
The network has a bandwidth 1Gbs.
Need to calculate the bandwidth for all services, such as Iub, Iur, IuCS, IuPS....
How can I check how many percent using under each service?

BR,

Hi, elpirata! You may use this formula for IuPS DL, kbps = 8*pmNoRoutedIpBytesDl/(RopCounter*900).