PDA

View Full Version : Huawei: Iphone cause high RTWP Issue



nupong
2013-06-25, 07:15 PM
Regarding to previous posted by RFOptimizer, it is mentioned about Iphone which cause high RTWP

http://www.finetopix.com/showthread.php?35836-RTWP-parameter-optimization-summary (http://www.finetopix.com/showthread.php?35836-RTWP-parameter-optimization-summary)


Please find attachment for more details about RTWP with Iphone(3GS/4/4S). I don't know if Iphone5 is still occurred

"Because there are no TPC command from network ,Iphone 4 may have problem with inner loop power control ,
that cause RTWP increased high value in a very short time (eg.40ms ,UE TX Power can increase 60dB)"

giegala
2013-06-27, 03:35 AM
Hi,

we have experienced this issue in the network. Actually, the problem is fixable by parameters setup in Huawei RNC. The root cause ( not indicated in the presentation) is that RNC deletes RL too early in NodeB. Because of that phone looses syncronization with the network and ramps up the power, trying to reestablish the link. Furthermore if you consider that inner power control has 1500Hz frequency, and default 1db step, it takes 40ms to ramp up the power for 60db (1/1500 * 60) - so there is no magic, just lousy procedure from network side

nupong
2013-06-27, 11:44 AM
Hi,

The root cause ( not indicated in the presentation) is that RNC deletes RL too early in NodeB.


Actually this happened just for Apple products even RNC delete RL too early. So, network side need to extend the delay to fix Apple product algorithm. This problem had been acknowledge by Apple


"UTRAN make a delay for release the radio resource during RRC connection release procedure ,to make Iphone 4 inner loop power control work normally"

samcooldude1430
2014-04-23, 06:11 AM
I am facing this issue in my network, please help me to address it.