PDA

View Full Version : BER counter


justdream
2013-03-11, 08:42 PM
Dears,

Are there any 2G counters that could indicates cells suffer from high BER?
Handover24
2013-03-12, 08:25 AM
Radio quality gives you that.
BR
Handover24
auto_art
2013-03-12, 12:29 PM
Dears,

Are there any 2G counters that could indicates cells suffer from high BER?

are you talking about BER on LAPd interface? it is available in Huawei, search counter for error seconds.
justdream
2013-03-12, 04:54 PM
Yes, I'm talking about BER on LAPD
Handover24
2013-03-12, 10:56 PM
If you are talking about BER on LAPD just check "TRAU frame on HEdex" you will get all...( also PTRAU for PS service ).
Regards.
auto_art
2013-03-13, 03:51 PM
31934

hi check this..
hamody2005
2013-03-15, 03:57 AM
Dears,

Are there any 2G counters that could indicates cells suffer from high BER?

In Huawei CDMA system you can run this Command

Run the LST CBTSLNKERRCNT FOR (CBTS) or LST BTSLNKERRCNT FOR(BTS)command to query the number of BTS link errors.




The number of BTS link errors is saved in a file in the following paths by default:

D:\Airbridge\services\E1ERRCNT. The file name is BTSXXXLinkErrorCount.txt, where XXX is the BTS ID, which consists of three digits and starts with 0 if the BTS ID does not reach three digits. (BTS V300R001)
D:\Airbridge\services\LinkErrCnt\. The file name is BTSXXXXLinkErrorCount.txt, where XXXX is the BTS ID, which consists of four digits and starts with 0 if the BTS ID does not reach four digits. (BTS V300R002 and its later versions)





If it's helpful don't forget Rep.