PDA

View Full Version : Commands for TEMS Pocket phones



MaClaud
2013-02-28, 02:44 AM
Hello,
I possible control tems pocket phones using some commands similar AT commands. For example lock handset to GSM channel and get info about this channel by sending some commands... I have not found any documentation about this.

Thank you for all answers!

JMGUD
2013-02-28, 03:36 AM
of course it is possible, but these commands are hidden.

MaClaud
2013-02-28, 03:43 AM
Good answer but quite simple :) is possible to get it?

uel888
2013-03-03, 07:39 AM
Try to flash your phone with Tems firmware then use adb for android fone.

Use adb dump or dumpsys :-)


Good answer but quite simple :) is possible to get it?

MaClaud
2013-03-05, 01:37 AM
Thank, great idea. Unfortunately I have not any Android TEMS phone now. I have to get someone and I will post results.

Is there any chance to control devices with STE chipset (for example W995).
This is very important for me, but I can not get any advise or solution :/

andrew
2013-03-07, 05:44 PM
controlling tems pocket is not done by at command.
but you can mimic the keypress via at command to control it (at+ckpd or something). as for log dump, you can only fetch some info via debug port.
if you're really interested in full control and dump, sniff the protocol when connecting tems pocket to tems investigation.

MaClaud
2013-03-15, 03:26 AM
Sniff protocol is possible, but it is not possible to decode it without any description because it isn't standard "text protocol" of course.

firewise
2013-04-03, 10:25 AM
Only a small part of a common command is available, many of the AT commands are not suitable for use.

seagle
2013-04-25, 03:08 PM
Hi I DON'T NO,IF YOU KNOW,PLEASE TELL ME

piaoyisihai
2013-04-28, 02:31 PM
Very grateful to colleagues, I finally know the phone!